Available Colors Of The Organized Obie Magnetic Door Holder For RV Doors

Question

Question:

Is white available?

asked by: Allen E

1

Helpful Expert Reply:

The Magnetic Door Holder for RV Doors # OBE37FR is currently only available in black. We do carry a C-Clip style door stop/holder in white # 37210204.

expert reply by: Kevin C

1

Answer 1

Yes the Magnetic Door Holder part #OBE37FR that you referenced will work great for what you are looking for. This would work with the door stop you have now that is magnetic or could be used to replace what you have all together as well.

view full answer...

Answer 2

The distance the Magnetic Door Holder for RV Doors #OBE37FR the hold the door from the wall is 3-3/8 inches like you can see in the picture I attached.

view full answer...

Answer 3

In order to install the MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways part #MR98RR on a Keystone Cougar 31SQB you'll need to remove the door rod stop from the threshold. You can then replace this with another option…

view full answer...

Answer 4

I'll try to answer these in order for you. First, the Buyers Products Door Check and Hold Back #337BM2395AA11 does hold the door open at a 90 degree angle with 30-lbs of pressure, so as long as it's not a heavy wind it should hold everything…

view full answer...

Answer 5

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 6

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 7

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 8

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 9

I checked your order notes and the leaf springs you bought last year were the part #e28SR which are for 5k axles. Since this is over the capacity of your axle failure would not have been caused by over loading the trailer assuming you stayed under…

view full answer...

Answer 10

The Dexter 072-078-00 is a 2,200 lb capacity leaf spring. You can use a higher capacity leaf spring, however it won't increase the capacity of your trailer as the axle is still rated for that max capacity of 4,400 lbs. My recommendation for a…

view full answer...

Answer 11

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 12

You'd need a new panel like the Progressive Dynamics Mighty Mini part #PD4045KA which is the most similar to your Parallax 7345 except is Lithium battery compatible. There isn't a center section replacement available for what you have that…

view full answer...