Can Kuat Transfer V2 Bike Rack be Used for Electra Step-Thru Bike with Fenders

Question

Question:

I have a step through bike with fenders, directions say to have the tire holder as close to the for as possible. The front fender sticks out 8” from the fork, would this be a bad idea, and I should just go with a frame secured rack. Any suggestions, I like the swagman chinook, does it compare with the kuat reliability. Thanks.

asked by: Jon P

0

Expert Reply:

If you had a really short front fender then you could probably get away with using the Kuat Transfer V2 Bike Rack # KU84FR, but since those front hooks will be 8" out from the fork we want to go with a bike rack that secures the bikes by the frame like what you mentioned.

The Swagman Chinook # S64683 is a decent bike rack but I would say the Transfer V2 definitely outshines it when we are talking about quality - Kuat just prides themselves on outputting higher-end products while the Swagman brand is a good, middle-of-the-road type of bike rack. For something a little nicer I recommend checking out the Hollywood Racks Sport Rider SE Bike Rack # HLY84FR. This is just a little easier to use and it can accommodate a wider variety of bikes.

If the step-thru gap on your Electra bike is pretty significant you'll probably want to pick up an adapter bar like part # 64005 as well so the hook can secure the bike up higher.

Attached are some review videos for you to check out.

expert reply by: Jon G

0

Answer 1

The Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks w/ 2" Shanks - 8-1/2' Long #S64030 works with Swagman bikes with a 2" shank. The Swagman XTC2 TILT Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches -…

view full answer...

Answer 2

I can help you out with the correct lock for the Swagman XTC-2 TILT 2-Bike Platform Rack #S64671. Since this bike rack is a fit for both 1-1/4" and 2" trailer hitch receivers, the correct lock is the Locking Anti-Rattle, Threaded…

view full answer...

Answer 3

The Swagman Anti-Rattle Hitch and Cable Lock, part #S64031 will indeed replace the hitch pin that's included with the bike. You will need a wrench to install/remove the rack, but it's not really a big deal. I went to the local discount…

view full answer...

Answer 4

There sure is! For a locking anti-rattle hitch pin/cable lock combo, use #S64031 or for the hitch pin only, use #S64029. I've linked to product description videos for each part.

view full answer...

Answer 5

Yes, you are on the mark with the correct hitch and cable lock for the Swagman XTC-2 TILT 2-Bike Rack #S64671. - Anti-Rattle Hitch Lock and Cable #S64031 This is exactly what you need to lock the XTC-2 TILT to your Subaru Forester as well as lock…

view full answer...

Answer 6

I have a solution for you. Here at etrailer, we highly discourage the use of wheel-mount style bike racks when transporting bikes with fenders. With that being said, even if the front wheel of your Macwheel did safely attach to the Kuat Transfer V2…

view full answer...

Answer 7

The Kuat Transfer V2 #KU84FR is an excellent choice in a bike rack and will fit great with the Curt Trailer Hitch #C13513 on your 2006 Kia Sorento. The Transfer series has been a favorite of mine for a while now because it's ease of use and the…

view full answer...

Answer 8

Yes, the Kuat Transfer V2 Bike Rack for 2 Bikes #KU84FR can be used with with the 2" hitch on your 2015 Subaru Outback as long as it meets the tongue weight rating, most 2" hitches will. A Class II tongue weight rating is typically at least…

view full answer...

Answer 9

It depends on the style of bike you have, but if you have a road bike with pretty narrow handlebars there is a very strong possibility you would be able to open the hatch of your 2012 Toyota Prius with the Swagman XTC-2 and bikes installed. If you…

view full answer...

Answer 10

The center mast on the Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches - Frame Mount Item #S64650 folds down and flat with the base of the rack. With the bikes removed the rack should still sit below the top of the bumper, which…

view full answer...

Answer 11

When it comes to construction and the powder coat, both the Hollywood Racks SportRider SE2 #HR1000Z and the Swagman Chinook #S64683 are both made of steel and will come with a heavy powder coating on them to help fight off corrosion. Additionally,…

view full answer...

Answer 12

Both the Swagman XTC-2, #S64670, and the Hollywood Racks Trail Rider, #HR200Z, are hitch-mounted, platform-style bike racks which are able to transport a pair of bikes. Each can fit 1-1/4- and 2-inch hitches with straps that hold the wheels in place…

view full answer...