Tow Bar Wiring Recommendation for 2022 Jeep Gladiator

Question

Question:

What would wiring harness would you recommend for flat towing a 2022 gladiator behind a motorhome using the motorhomes electrical power

asked by: James A

0

Expert Reply:

I'd recommend the Roadmaster Diode Kit part # RM-15267 which installs diodes on the taillight wiring of your 2022 Jeep Gladiator so that your motorhome can activate the taillights. I attached an install video for this kit on a similar 2021 Jeep Gladiator for you to check out as well.

expert reply by: Jameson C

0

Answer 1

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

view full answer...

Answer 2

We have great tow bar lighting solutions for your 2020 Jeep Gladiator but we don't have any plug and play options at this time. For lighting you can use the diode kit, #RM-15267, and not have to worry about cutting into the taillight housing.…

view full answer...

Answer 3

Yes, the Blue Ox Tow Bar Wiring Kit #BLU79FR would allow the use of a supplemental braking system and will transfer your motorhome's turning and braking signals through to your 2021 Jeep Gladiator's tail lights. This tail light wiring harness…

view full answer...

Answer 4

Thank you for all of the information! For your 2020 Jeep Gladiator I recommend using the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit #RM-15267 and then for your 2022 Chevy Equinox with LED lights I recommend the Roadmaster Universal…

view full answer...

Answer 5

For your 2021 Jeep Gladiator the correct Blue Ox base plate kit is the part #BLU53FR. For lighting you can use the diode kit, #RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to…

view full answer...

Answer 6

There are 2 possible reasons why your install of the Flexo-Coil Wiring Kit #RM-15267 is causing an error to pop up on your 2021 Jeep Gladiator; the first is that something was installed incorrectly, and the second is that you have the ParkSense on…

view full answer...

Answer 7

The difference between the #RM-154 and the #RM-152-98146-7 is the trailer connector and the umbilical. The #RM-154 provides 4 circuits to the towed vehicle, right turn/brake lamp, left turn/brake lamp, running lamps and ground. The #RM-154 would…

view full answer...

Answer 8

For tow bar lighting for your 2018 Jeep Wrangler JL you can use the diode kit, #RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight…

view full answer...

Answer 9

You can use standard Diodes #RM-790 on your 2022 Ford F-150 Hybrid with the LED tail lights. I recommend using the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit #RM-15267 as your F-150 will also need a Charge Line Kit #RM-156-25 to prevent…

view full answer...

Answer 10

The tow bar wiring kit I would recommend for your 2020 Jeep Wrangler Unlimited is the Roadmaster Diode Kit part #RM-15267 which we had chance to install on a similar 2022 Wrangler Unlimited and shot an install video for which I attached to this page.…

view full answer...

Answer 11

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...