Would Reese Slider Hitch RP30048 Give 2022 Ram 2500 Needed Turning Clearance

Question

Question:

Will the Reese RP30048 slider Let me do a 90° turn with a 2022 ram mega cab

asked by: Avery

0

Expert Reply:

Yes, using a slider like the part # RP30048 would give your 2022 Ram 2500 plenty of turning clearance since it has a 6-1/2 foot long bed.

expert reply by: Jameson C

0

Answer 1

The amount of rollers does play a pretty big factor in how smoothly the slider will operate. The 6 roller part #RP30048 will work a bit smoother than the 4 roller part RP30092. That being said the round tube sliders are hands-down the smoothest.…

view full answer...

Answer 2

It sounds like you have an older version of the Kwik Slide part #RP30048. I attached a link to a page that has the install instructions that detail how to operate the slider. Basically you will only need to slide the hitch back when you are taking…

view full answer...

Answer 3

Yes, the Reese Square Tube Slider #RP30048 will raise the height of your 15K hitch a little higher than it currently sits with the stationary legs. For example, the stationary Reese 16K #RP30047 has a hitch height range of 13-1/2" - 17" but…

view full answer...

Answer 4

You can convert the Reese fifth wheel hitch you have to a sliding fifth wheel and still use the standard base rails you have. You will need the Reese Fifth Wheel Slider w/ Rollers for 15K, 16K and 20K Head, part #RP30048 or #RP50024. You will also…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

No, you cannot tow the trailer with a slider in the slid back position. This position is only for tight maneuvers where extra clearance is needed between the truck cab and the trailer overhang to safely make tight turns. For regular towing the hitch…

view full answer...

Answer 7

Due to the slider mechanism you lose the ability to use the setting that would put the hitch in the lowest position when attaching a head to the Reese Square Tube Slider #RP30048. That shouldn't be a problem for you since you said you need to…

view full answer...

Answer 8

We have exactly what you are looking for, part #PK11893-11932. This harness would plug inline with the existing trailer connector, and would allow you to retain the use of the connector on the bumper once the connector in the bed is installed. To see…

view full answer...

Answer 9

It is certainly possible for the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY58GR to work on your 2020 Ford F-250 Super Duty short bed, but there are likely going to be clearance issues as these are meant for long bed trucks. That…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Would Reese Slider Hitch RP30048 Give 2022 Ram 2500 Needed Turning Clearance

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching