Where is Brake Controller Install Port on 2016 Ford E-Series Grayhawk

Question

Question:

i bought a brake controller from you for a 2016 e450 ford grayhawk where is the plug that fits the harness of the controller

asked by: Greg B

0

Expert Reply:

I attached a picture that shows where you'll find the harness on your van to plug in the install harness # 3034-P like what is needed to install the Brake EVN # TK63VR.

expert reply by: Jameson C

0

Brake Controller Install Port Location on 2016 Ford E-Series
(click to enlarge)

Answer 1

Yes. The Brake Buddy Classic 3 #HM39494 is designed to work as a universal type installation so it will work well and is one of the portable supplemental braking systems we recommend for the 2021 Jeep Gladiator. The Brake Buddy Classic 3 #HM39494…

view full answer...

Answer 2

Yes, the etrailer SD Non-Binding Tow Bar #e34ZR will fit to the etrailer Invisible Base Plate Kit #e98948 on the front of your 2021 Jeep Gladiator. This base plate fits models with the factory plastic front bumper. You may need a High-Low adapter…

view full answer...

Answer 3

The etrailer tow bar part #e47ZR is the most similar to a Demco Commander II tow bar part #DM9511012-BX which also fits the Blue Ox tow bars. Functionally you'd have very similar flat towing experiences with these or the Blue Ox Alpha part…

view full answer...

Answer 4

The SoftStartRV Soft Start for RV AC Units part #SSR54FR is universal, meaning it will work with all RV air conditioners. There are specific wiring diagrams for each type of A/C unit. I have attached a sample install video for you but you may need to…

view full answer...

Answer 5

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 6

The replacement pin and cable you need for your Bright Way breakaway switch part #3802348 is the part #3802350!

view full answer...

Answer 7

The part number 072-097-00 is for a Dexter leaf spring. Our closest equivalent would be the 5-Leaf Double-Eye Spring item #e34SR. This is a 3,000 lbs spring that works with 6,000 lbs axles. It measures 25-1/4" long from eye hole to eye hole.…

view full answer...

Answer 8

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

We can get you a replacement for your TDE LP75 disc brake actuator; that's a 7,500 lb actuator that accepts a 2" hitch ball, and the correct option will depend on if your trailer tongue is 3" wide x 4" tall or 3" wide x…

view full answer...

Answer 11

What you describe is called 'cupping', where the tire looks like something's been taking bites out of it. Usually cupping on a tire is caused by the tire bouncing on the road, which can have many causes. Check the air pressure in your…

view full answer...

Answer 12

Adjustable suspension enhancement would be your best option. This will give you the ability to add the exact amount of additional support you'd need to prevent bottoming out while also not making the suspension overly stiff. So for that you'd…

view full answer...