Determining Which Slide Out Gear Pack Is Needed For A 2013 Forest River Rockwood Signature

Question

Question:

Need to know part number for 2014 rockwood 8329ss slideout gear pack. Trailer was purchased july 2013.

asked by: VINCENT E

0

Expert Reply:

In order to determine the correct slide out gear, you will need to first identify the size of the arms attached to your slide out on your 2014 Forest River Rockwood Signature.

-For 2" x 3" slide arms, you'll want to use # LC140409.

-If you have 2" x 2" slide arms, you'll want to use # LC281331.

-Finally, If you have 2-1/2" x 2-1/2" slide arms, you'll want to use # LC123356.

expert reply by: Bryce D

0

Answer 1

The correct replacement gear pack for your Lippert slide out will depend on the size of the arms attached to your slide out: - 2" x 3" Slide Arms: Lippert Standard Slide-Out Gear Pack #LC140409 - 2-1/2" x 2-1/2" Slide Arms:…

view full answer...

Answer 2

You'll need to measure the arm (pictured below) to determine the correct size gear pack replacement for your trailer's slide outs. For 2" x 2" you'll need #LC281331 For 2.5" x 2.5" you'll need #LC123356 For 2"…

view full answer...

Answer 3

Manufacturers do not list the parts they use so we do not know what size gear pack is needed for your 2010 Tiffin Allegro Open Road 34TGA without first measuring the arm. For a 2 x 2 Arm you'll need part #LC281331. For a 2.5 x 2.5 Arm you'll…

view full answer...

Answer 4

You are exactly correct, that is referring to the tubing size that makes up the arm assembly. The Gear Pack bolts to the arm assembly, so the housing needs to be the correct width in order to fit.

view full answer...

Answer 5

The Furrion RV Electric Fireplace with Logs - 30" Wide - Recessed Mount, #F30SW15ABL per installation instructions (starting, page 7). Listed under the Wall-mount Installation (Half Flush-mounted) the table shows dimensions of cut out for…

view full answer...

Answer 6

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...