Correct 12" Spare Wheel/Tire for Malone MicroSport Trailer

Question

Question:

Can I use this for a spare tire on a Microsport trailer.

asked by: Donald W

0

Expert Reply:

The correct spare wheel/tire for the Malone MicroSport Trailer part # MPG460G is the Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel part # AM30670 or the Spare Tire for Malone MicroSport Trailer part # MPG465 which comes with a spare tire holder.

expert reply by: Conner L

0

Answer 1

We actually carry the spare tire that fits the Malone MicroSport Trailer #MPG460G. The spare is #MPG465 and does have a 5 on 4-1/2 bolt pattern. With that being said it would be more cost effective for you to purchase two 4.80-12 trailer tires,…

view full answer...

Answer 2

I checked with Malone and the told me the internal dimensions of the Malone Plastic Storage Trunk #MPG536 are 29”x13”x11”. They also volunteered that the internal dimensions of the #MPG537 are 41”x15.5”x15.5”.

view full answer...

Answer 3

Yes, the Malone MicroSport Trailer for 2 Fat Bikes and 2 Kayaks #MPG461KB will have the Certificate of Manufacture included from Malone. If for any reason you are unable to locate this document in the paperwork, please contact our customer service…

view full answer...

Answer 4

Trailer tires should always be inflated to their max capacity. This helps with load carrying capability but also for heat dissipation and wear. With your tires at 60 lbs, you will have your tires getting too hot and wear too fast as well as decreased…

view full answer...

Answer 5

When you say Kenda Loadstar K353 12", I believe you are referring to the Kenda K353 Bias Trailer Tire - 4.80-12 part #AM10062 or Kenda K353 Bias Trailer Tire - 5.30-12 part #AM10066. Both of these Kenda K353 Bias trailer tires are rated for 65…

view full answer...

Answer 6

The 12 inch tires that we carry are rated for 65 miles per hour. Any faster than that for extended periods and the excessive heat build up will cause tire failure. To get a tire with a higher speed rating you would have to go up in size. That also…

view full answer...

Answer 7

The Kenda Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel #AM30670 will have a load range of 990 pounds at 90 psi and will have a 65 mph speed. Bias tires will also run pretty hot at highway speeds and distances, which can and will…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...