Does Curt Hitch C13416 Fit 2022 Toyota RAV4 Hybrid

Question

Question:

Looking to purchase 76201 However, this will be for a 2022 Toyota Rav4 Hybrid Limited. Is there any way to verify if this hitch is compatible with that year of vehicle? Thank you.

asked by: Steve C

0

Expert Reply:

We have confirmed that the Curt # C13416 does fit your 2022 Toyota Rav4 Hybrid Limited.

expert reply by: Jameson C

0

Answer 1

For the highest quality trailer hitch with a concealed crosstube for your 2020 Toyota RAV4, the best option is from Curt: - Curt Trailer Hitch Receiver #C13416 I have added a photo a customer sent in which shows the Curt #C13416 installed on a 2020…

view full answer...

Answer 2

Yes, the Draw Tite hitch part #DT82QR that you referenced does fit your 2020 Toyota RAV4 Hybrid model. I attached a picture we got from a customer who installed it on a 2019 Hybrid model just like yours and they told us it fit well and installed…

view full answer...

Answer 3

The Curt hitch part #C13416 that you referenced fits both the hybrid and non-hybrid models of the 2019 Toyota RAV4 so it will fit either way. I attached an install video for this hitch on a similar RAV4 for you to check out as well.

view full answer...

Answer 4

You actually won't need to trim any rear fascia when installing any of our trailer hitches on your 2020 Toyota RAV4. Out of our selection I recommend going with the Class III Curt Trailer Hitch #C13416 because it has a 2" receiver (so it is…

view full answer...

Answer 5

The Yakima HoldUp Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount #Y02443 would work well for your Aventon Pace 500 electric step-thru bike. Since you don't have fenders or baskets, the ratcheting hooks can clamp around your wheels without…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

For your 2024 Toyota RAV4, the best trailer hitch receiver that will fit is the following: - etrailer Trailer Hitch Receiver #e23ZR The #e23ZR is the best because it has completely concealed crosstube so only the receiver is showing, allowing your…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Does Curt Hitch C13416 Fit 2022 Toyota RAV4 Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching