Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch for a 2022 Ram 2500 Short Bed w/ Ram Boxes

Question

Question:

Will this fit a 2022 Ram 2500 with the 6 1/2 foot bed and ram boxes?

asked by: Shawn L

0

Expert Reply:

Yes, the Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch - 35,000 lbs item # C60633 will fit all models of the 2022 Ram 2500 so long as they do not have the factory towing prep package. I have linked an installation video.

I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long
Item # C56070 to your towing setup. This harness will provide you with an in-bed 7-way vehicle connector to make connecting to your gooseneck trailer's wiring easier.

expert reply by: Jerred H

0

Answer 1

The Curt #C60633 Custom Under-Bed mount gooseneck hitch you'd looked at is compatible with your 2019 Ram 2500 Diesel as long as it doesn't have the factory puck system. If you'd like to install a 7-way trailer connector in the truck bed…

view full answer...

Answer 2

For your 2022 Ram 3500 6-1/2 foot bed we have the Curt fifth wheel hitch part #C60633 that is a confirmed fit and our best option for your truck. It has a high towing capacity of 35,000 lb and is highly reviewed by our customers who have tried it.

view full answer...

Answer 3

I have a way better option since you're looking for a product made in the USA. The Curt item #C60633 is not made here only assembled it does have the installation hardware though. Instead, I highly recommend the B&W Turnoverball Underbed…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Installing ta Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box like the #325-GH-8045 would not void the warranty of your camper, and Gen-Y makes some of the most durable parts on the market. I really like this as an alternative to…

view full answer...

Answer 10

Hey Ted, so if you look in the bed of your truck and see 5 holes/pucks that would mean you have the OEM prep. I'd assume if you had it you'd have seen them by now. If you had it you'd only need a ball like the part #C60618. If you…

view full answer...

Answer 11

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 12

Gen-Y's calculation for pin weight is a safe guess, but isn't the most accurate so the only way you'll get the correct capacity Gen-Y 5th Wheel Pin Box is to fully load the trailer and go to a commercial scale to measure the pin weight.…

view full answer...