How To Install Camco RV Vinyl Trim Insert

Question

Question:

Can you please direct me in the correct direction for this item, thanks

asked by: Ray M

1

Helpful Expert Reply:

The Camco RV Vinyl Trim Insert part # CAM25262 does not come with instructions. It's designed to slide into a channel or track. If the ends of the track/channel are not open then you will need to press the vinyl into the opening. I have also heard that a window screen replacement tool works well for this.

expert reply by: Conner L

1

Answer 1

Thank you for the photo of your travel trailer's window trim channel for which you are looking for new cosmetic vinyl trim. I went to our warehouse to look at Camco trim insert #CAM25262 which at 3/4-inch width is the closest to your…

view full answer...

Answer 2

Yes, you can upgrade your current leaf springs with the higher rated 4,500 lb part #e27SR and you'll be fine. The suspension might be a little stiffer but you wouldn't have to worry about it going flat like what you have now.

view full answer...

Answer 3

According to my research, the Artis PDS1RV25 water pump is a 12 volt, 3 gallon per minute pump, and we do have the perfect option for a replacement: - Flow Max RV Fresh Water Pump #LC689052 This is also a 12 volt, 3 gallon per minute pump, though it…

view full answer...

Answer 4

For your 2016 Grand Design Reflection 29RS, we have two possibilities for replacement springs that work for 4400-lb axles. You need to measure from the center of one eye of the leaf spring to the center of the other to get the proper length. However,…

view full answer...

Answer 5

The Camco RV Vinyl Trim Insert #CAM25202 is 1-inch wide and is intended to slide into an existing metal track on an RV, such as the one shown in the linked photo. That metal channel is what holds the trim strip in place. We have this type of material…

view full answer...

Answer 6

The best way to select the correct size vinyl trim insert is to measure the trim insert you have now while flat, not the track. We don't really recommend measuring the track as they are not all a standard width. That said, we only offer vinyl…

view full answer...

Answer 7

You may be able to get leaf springs with an extra leaf or two for your Keystone Cougar half-ton, it just depends on the leaf springs you need. While we don't have any way of knowing what specific ones you need, to find the right ones all you need…

view full answer...

Answer 8

Yes, we do offer a replacement lens for the Optronics Porch and Utility light #RVPLL13AB with the part #APLL11AB.

view full answer...

Answer 9

I'd have to see a picture of the light to see what lens it might need since that's not info that we can look up. If it looks like the part #RVPLL13ab though the correct lens is the part #APLL11AB or for clear you'd want the #APL5CB.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

How To Install Camco RV Vinyl Trim Insert

Product Page this Question was Asked From

Continue Researching