Recommended B&W Biker Bar for a Harley Davidson Tri Glide

Question

Question:

will this work for a harley tri glide?

asked by: Wade A

0

Expert Reply:

Yes, it does. The B&W Biker Bar Motorcycle Tie-Down System item # BWMC2301 will work with your Harley Tri Glide. B&W has confirmed this information with us.

expert reply by: Jerred H

0

Answer 1

First of all that's a pretty sweet looking bike! Secondly, while there are no B&W Biker Bar systems specifically designed for your Indian Chieftain, you still might be able to utilize the Tie-Down System #BWMC2301. I've attached a photo…

view full answer...

Answer 2

We've checked with B and W before and they have told us that for the Harley Tri Glide the correct Biker Bar is the part #BWMC2301.

view full answer...

Answer 3

Yes, the B&W Biker Bar Motorcycle Tie-Down System #BWMC2301 is the correct system for both your 2016 Ultra Limited(FLHTK) and 2021 Road Glide Special(FLTRXS). It fits all FL Touring models Harley Davidson motorcycles. Your 2014 CVO…

view full answer...

Answer 4

I have a solution for you, but there is not an adapter that will allow you to mount the B&W Biker Bar #BWMC2301 to an e-track setup on a trailer. The Biker Bar does come with mounting plates/anchors that are mounted on the underside of your…

view full answer...

Answer 5

I have a solution for you to secure your 2020 HD Tri-Glide Ultra Trike to the floor of a trailer, but the B&W Biker Bar #BWMC2301 is only compatible with the 2014 and earlier Tri-Glides. After 2014 they changed the location of the foot-brake,…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Recommended B&W Biker Bar for a Harley Davidson Tri Glide

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching