Hitch Solution for 2019 Forest River Sabre

Question

Question:

I have a 2019 Forest River Sabre and am wanting to put a reciever hitch on the back to carry a yakup. Could you tell me which hitch I need please. Thanks you

asked by: Robert B

0

Expert Reply:

For campers like your 2019 Forest River Sabre the best hitch option is the Curt # 13703 which fits all RV frame styles that are between 22 and 72 inches apart measured from outside to outside.

expert reply by: Jameson C

0

Answer 1

For the hitch prep on a 2019 Cherokee Artic Wolf I believe the prep brackets will use the Lippert 1-1/4" Trailer Hitch Receiver for I-Beam Campers and Trailers - 68-3/8" Width #LC240220. You will need to measure the brackets to confirm the…

view full answer...

Answer 2

All of the Curt trailer hitches for the 2007 Chevy Express Van exclude RV cutaway models which is what your RV is. At this time we do not have a confirmed fit for the RV cutaway models. You would need to use a hitch like #13703 that you have…

view full answer...

Answer 3

As long as the trailer's frame is between 22 and 72 inches apart measured on outsides the Curt multi-fit hitch part #13703 is going to fit and work well. In the install video I attached we installed it on a bumper pull trailer like you mentioned…

view full answer...

Answer 4

Hitches like the Curt Adjustable RV Hitch #13703 that you were looking at are designed to attach to either I-beam, C-channel or box RV frames, so bolting them to any other structure is not recommended for safety reasons. The #13703, fits frames that…

view full answer...

Answer 5

The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide, #13703 appears to have the greatest amount of drop of anything currently available. I suggest considering the fabrication of an additional plate using flat steel to get…

view full answer...

Answer 6

Curt recommends the stabilizer strap with non-supported loads like bike racks to help support the hitch when going over bumps to prevent some of the vertical shock from being transferred to the hitch. Curt does this as a precaution, it's not that…

view full answer...

Answer 7

The main tube on Curt trailer hitch #13703 measure 2-5/8 inches square on the outside. The wall thickness is 1/4 inch. The overall length is 68-1/2 inches. On the brackets, measuring from the center of the main tube to the nearest end of the bracket…

view full answer...

Answer 8

For an RV approved e-bike rack the Hollywood Racks RV Rider part #HLY64FR would work great at the rear of your camper trailer. For a hitch the best option is the Curt RV Multi Fit hitch part #13703 which fits frame widths of between 22 and 72 inches…

view full answer...

Answer 9

The answer is actually yes to both; you can convert the 84" wide carrier to a 60" wide carrier, and conversely the 60" carrier can be converted to an 84" wide carrier with the extension. To go from 60" to 84" here's…

view full answer...

Answer 10

Good question, and there isn't an online resource that I was able to find so there are a couple of things you can do to find out the bumper capacity on your 2019 Chaparral so you can safely mount the cargo carrier you asked about, which is the…

view full answer...

Answer 11

The bike rack you'd want is the Swagman E-Spec part #S94FR which is a 2 inch hitch only, rated for heavier e-bikes, is rated for use at the rear of a motorhome, and since it was designed for e-bikes can be used on the frame style you have without…

view full answer...

Answer 12

I have another option but there is not a 2"x2" receiver version of your Lippert 1-1/4" Trailer Hitch Receiver for I-Beam Campers and Trailers - 68-3/8" Width #LC240220. The closest option is to use the Curt Adjustable Width…

view full answer...