Replacement Lift Arm For Fan-Tastic Vent With Power Lift

Question

Question:

Hello, Would you have a lift arm for a Fan-Tastic RV vent. It is not the manual vent, but the electric product. Thanks

asked by: Henri

0

Expert Reply:

The correct replacement arm for your Fan-Tastic Vent roof vent is the Replacement Lift Arm for Fan-Tastic Vent Roof Vents # FVK8011-05. The replacement arm is the same for the power lift and the manual vent.

expert reply by: Robin H

0

Answer 1

The number you mentioned is actually not a part number but we do have lift motors that would potentially work. To find out which lift motor you need there should be a number 7 or 17 on the actual motor, which is the RPMs of that motor. If the motor…

view full answer...

Answer 2

The old screen design that you have now which was secured via screws around the outer perimeter has since been axed in favor of the plastic tabs that you see on the Replacement Bug Screen for Fan-Tastic Vent RV or Trailer Roof Vents part…

view full answer...

Answer 3

According to my research the Replacement Lift Arm for Fan-Tastic Vent Roof Vents #FVK8011-05 should be what you're looking for. Attached is a review video for you to check out.

view full answer...

Answer 4

I attached a picture of the style of lift arm that the part #FVK8011-05 is designed to replace. Check it out and compare it to what you have to know if it is the correct replacement product.

view full answer...

Answer 5

If what you have is a series 400R, 6600, 8000, or 6000 model LR8191 Fan-Tastic Vent Roof Vent Fan, then the correct fan motor replacement is part #FVK8017-00. If you have a different one, please let me know and I will confirm which is the correct…

view full answer...

Answer 6

Thank you for providing the pictures. The Fan-Tastic Vent Replacement Lift Arm for Roof Vents with Flat Lids item #FVK8014-05 replaces the flat roof vent arm on Fan-Tastic Vents. If you have a Domed shape Fan-Tastic vent you will need the…

view full answer...

Answer 7

From the underside of the roof vent the Operator part #FVK8011-05 that you referenced is held on with two screws. This kit comes with new screws if they end up getting damaged. You'd just need to use a screwdriver to remove them from the…

view full answer...

Answer 8

We do have a Fan-Tastic lift arm with the roller on the side of the arm that you are looking for with the part #FVK8011-05.

view full answer...

Answer 9

Thanks for the photo and based on that it looks to me like you may have had a continuous hinge and would need the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White #BV0554-01, though you are going to want to confirm this is…

view full answer...

Answer 10

Yes the Replacement Lift Arm for Fan-Tastic Roof Vents #FVK8011-05 is the correct part you need. This part is meant to fit with Fan-Tastic products that feature a domed lid, which your Fan-Tastic 4000R has. We also offer the Replacement Lift Arm…

view full answer...

Answer 11

There is not a fuse we carry for the 8000 Series of Fan-Tastic vent. It does use a 4 amp slow blow fuse so to make fuse access simpler you can use In-Line Fuse Holder #C58470-1 and if you need to replace the bow-tie bracket, motor, and blade the…

view full answer...

Answer 12

Yes, I contacted Fan-Tastic Vent and the replacement lift arm part #FVK8011-05 fits vents with domed lids. If your vent has a flat lid then you need the lift arm for flat lids part #FVK8014-05. I have attached two photos that show the difference.

view full answer...