How is Lift Arm Assembly # FVK8011-05 Attached to Roof Vent

Question

Question:

How do you remove the old one, and install the new one??? From the top it looks like rivits. Thanks

asked by: Jim

0

Expert Reply:

From the underside of the roof vent the Operator part # FVK8011-05 that you referenced is held on with two screws. This kit comes with new screws if they end up getting damaged. You'd just need to use a screwdriver to remove them from the bottom.

expert reply by: Jameson C

0

Answer 1

I attached a picture of the style of lift arm that the part #FVK8011-05 is designed to replace. Check it out and compare it to what you have to know if it is the correct replacement product.

view full answer...

Answer 2

The distance between the bolt holes for the Replacement Lift Arm #FVK8011-05 is 2-15/16" on center. The arm itself measures 6-5/8" long. I have attached some pictures for you to reference as well.

view full answer...

Answer 3

Yes, I contacted Fan-Tastic Vent and the replacement lift arm part #FVK8011-05 fits vents with domed lids. If your vent has a flat lid then you need the lift arm for flat lids part #FVK8014-05. I have attached two photos that show the difference.

view full answer...

Answer 4

I went out to our warehouse to take a couple measurements on the Fan-Tastic Vent Replacement Lift Arm #FVK8014-05 that you referenced. The distance between the two mounting holes, on center, is right at 3". The overall length on the arm is…

view full answer...

Answer 5

Thanks for the photo and based on that it looks to me like you may have had a continuous hinge and would need the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White #BV0554-01, though you are going to want to confirm this is…

view full answer...

Answer 6

The correct replacement arm for your Fan-Tastic Vent roof vent is the Replacement Lift Arm for Fan-Tastic Vent Roof Vents #FVK8011-05. The replacement arm is the same for the power lift and the manual vent.

view full answer...

Answer 7

Yes the Replacement Lift Arm for Fan-Tastic Roof Vents #FVK8011-05 is the correct part you need. This part is meant to fit with Fan-Tastic products that feature a domed lid, which your Fan-Tastic 4000R has. We also offer the Replacement Lift Arm…

view full answer...

Answer 8

Thank you for the photos! From what I'm seeing it looks like you need the Replacement Lift Arm #FVK8011-05 and the Replacement Dome #FVK1020-19 for your main vent. The dome should be an exact replacement while the lift arm doesn't…

view full answer...

Answer 9

According to my research the Replacement Lift Arm for Fan-Tastic Vent Roof Vents #FVK8011-05 should be what you're looking for. Attached is a review video for you to check out.

view full answer...

Answer 10

There is not a fuse we carry for the 8000 Series of Fan-Tastic vent. It does use a 4 amp slow blow fuse so to make fuse access simpler you can use In-Line Fuse Holder #C58470-1 and if you need to replace the bow-tie bracket, motor, and blade the…

view full answer...

Answer 11

Thank you for providing the pictures. The Fan-Tastic Vent Replacement Lift Arm for Roof Vents with Flat Lids item #FVK8014-05 replaces the flat roof vent arm on Fan-Tastic Vents. If you have a Domed shape Fan-Tastic vent you will need the Replacement…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

How is Lift Arm Assembly # FVK8011-05 Attached to Roof Vent

Product Page this Question was Asked From

Continue Researching