Correct Gearbox For LG-141893 Landing Gear Motor On My Fifth Wheel

Question

Question:

What is the correct gearbox for model LC 141893 motor For my landing jack on a fifth wheel

asked by: Andy

0

Expert Reply:

The correct gearbox to mate with the Replacement Motor for the no longer available Stromberg Carlson Electric Landing Gear Set LG-196308 will be the Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear # LG-179015. This is a direct replacement and the motor will bolt right on quickly and easily.

expert reply by: Lazer S

0

Answer 1

Since you have a Lippert brand powered landing gear set on your fifth wheel the correct replacement motor you'd want is the part #LC141893 that you referenced!

view full answer...

Answer 2

I reached out to my contact at Lippert and since your landing gear motor is blowing a fuse as soon as it sees load he mentioned the issue is more than likely that the motor is not getting the correct voltage, with the less common cause being the…

view full answer...

Answer 3

The correct replacement landing gear motor for your 2015 Grand Design Reflection 5th Wheel is the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor part #LC141893. The 12-Volt Motor Kit for Ram Landing Gear part #M1230 will fit but…

view full answer...

Answer 4

The max amperage draw for the fifth wheel landing gear motor part #LC141893 that you referenced is 30 amps so a 30 amp breaker like part #7012A would work well.

view full answer...

Answer 5

I called my contact at Lippert and asked about the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor, part #LC141893. The LC141893 is designed for an LCI landing gear with a weight capacity of 5,000 lbs. If you need a motor for a…

view full answer...

Answer 6

Any powered landing gear or powered tongue jack will draw less power as it legs descend down toward the ground and much more as soon as they make contact and encounter resistance. This is a normal occurrence. In the same way, any jack - even a manual…

view full answer...

Answer 7

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 10

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 11

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 12

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Correct Gearbox For LG-141893 Landing Gear Motor On My Fifth Wheel

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching