Draw-Tite Class V Hitch Receiver for a 2012 Ford F-350 Super Duty Dually

Question

Question:

Is this confirmed to fit a 2012 f350 DRW? Thanks

asked by: Ryan J

1

Helpful Expert Reply:

Yes, the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" item # DT45508 is confirmed to fit the 2012 Ford F-350 Super Duty Dually. The factory hitch will need to be removed to install this hitch. It does accommodate the full size spare tire. I have linked the installation instructions.

expert reply by: Jerred H

1

Answer 1

Utility beds make things complicated. I wish we had a hitch that would fit but it could potentially interfere with your utility bed so best option would be to contact manufacturer of the utility bed and see what they recommend.

view full answer...

Answer 2

I took a look at each hitch for your 2002 Ford F-350 Super Duty, and was able to find one option for a Class V hitch that will work with a spare tire, and is near flush with your bumper, which is the Draw-Tite Trailer Hitch Receiver #DT45508. This…

view full answer...

Answer 3

Based on the numbers and RPM you listed on your Dutchman 2007 trailer the correct slide out motor setup you need is the part #LC125802 that is a Tuson High Speed 18:1 9,000 RPM slide out motor.

view full answer...

Answer 4

The largest trailer hitch option we have available for a 2015 Ford F-350 is the Draw-Tite Trailer Hitch Receiver part #DT45508 which provides a 2-1/2" opening. There are no 3" opening options available for this vehicle. The capacities that…

view full answer...

Answer 5

I would be happy to help! Both the Draw-Tite Class V Trailer Hitch Receiver #DT45508 and the B&W Class V Trailer Hitch Receiver #BWHDRH25230 you were looking at for your 2004 Ford F-250/350 King Ranch will stick out from the bumper slightly like…

view full answer...

Answer 6

The Curt Hitch part #C15810 and the Reese part #DT45508 both are a fit for your 2015 Ford F-350 and appear to be very similar but the Reese does say that it will fit with your full sized spare unlike the Curt. Although the hitches seem to have…

view full answer...

Answer 7

The Draw-Tite Trailer Hitch #DT45508 for your 2016 Ford F-350 weighs in at 90lbs with all of the hardware.

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Draw-Tite Class V Hitch Receiver for a 2012 Ford F-350 Super Duty Dually

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching