What Roof Rack do You Recommend for My 2022 Jeep Grand Cherokee L with Flush Factory Rails?

Question

Question:

I have a 2022 Jeep Grand Cherokee L. What roof rack do you recommend to fit on my flush factory rails?

asked by: JP

0

Expert Reply:

For your 2022 Jeep Grand Cherokee L with flush rails, I recommend the following setup:

- Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long # RRVA126B-2
- RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms # RRRCL4
- Rhino-Rack Fit Kit # RRRCP64-BK
- All-Metal Locks # RRVA-LEC4

With this particular roof rack system, you receive an extremely aerodynamic system that ultimately boosts fuel economy and has a quieter ride. This particular roof rack provides you with 150 pounds of maximum weight capacity. As with all roof racks, I recommend that you confirm with your vehicle's owner's manual to make sure that your roof can handle that much weight.

expert reply by: Bob C

0

Answer 1

There is a great roof rack option from Rhino Rack that will fit the mounting holes on your 2018 Chevy Equinox with a naked roof. The Rhino Rack consists of Crossbars #RRVA118B-2, RCL Legs for Rhino-Rack Crossbars #RRRCL4 and Custom RCP Fit Kit…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

The Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount like #RTC16 will work with the Thule Tracker II feet. The Rhino-Rack Tracks are the same size as the Thule tracks.

view full answer...

Answer 9

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 10

Hey Luke, Sorry about the confusion, and we can 100% get your 2007 Honda Civic 4-door sedan set up with all the parts needed for a Rhino-Rack roof rack, including both crossbars. You would just need these parts: - Rhino-Rack Vortex Aero Crossbars…

view full answer...

Answer 11

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...