How To Determine Fit of Replacement Screen, Frame, Switch, and Wire for Ventline Roof Vent

Question

Question:

looking for replacement for a Ventline frame and screen. Will this part work BVC0573-31R? Thank You ......

asked by: Gary T

0

Expert Reply:

The Replacement Screen Frame with Screen, Rocker Switch, and Wire for Ventline Roof Vents part # BVC0573-31R is designed for V2094 (older style with 1-piece frame and push button switch), V2193, and V2394 models. The model will be on a sticker under the screen on the frame which can be found from the inside. This is really the only way to verify fit of roof vent parts.

expert reply by: Conner L

0

Answer 1

Since you have a Ventline V2394 the correct screen/frame you'd need is the part #BVC0573-31R.

view full answer...

Answer 2

When it comes to which surge protector is right for you, The Power Watchdog Surge Protector with Bluetooth - Portable - 50 Amp #HU47FR will get the job done, it is more powerful then the 30 amp. This surge protection module offers 6,100 joules of…

view full answer...

Answer 3

The correct replacement motor you would need for your V2094 Vent is the part #BVD0218-00 that you referenced. Based on what you described it sounds like you may have damaged the old motor when you attempted to clean it.

view full answer...

Answer 4

The correct replacement motor you would need for your V2094 Vent is the part #BVD0218-00. It sounds like you have the older version of this vent so you would also need to upgrade the fan blade as well with part #BVD0215-00.

view full answer...

Answer 5

I've linked all of the Ventline ceiling garnishes for roof vents that we carry on this page. They're all designed to fit 14-1/4 by 14-1/4 inch vents. The closest we have to your dimensions is #VA0445-26. I went out to the warehouse to measure…

view full answer...

Answer 6

For a ceiling that thick you'd want to go with the 5-5/8 inch tall garnish part #VA0445-37 which is also polar white.

view full answer...

Answer 7

The direct replacement for your Ventline screen with model number VD0434 is #BVD0434-31 (birch white) or #BVD0434-41 (polar white). This is compatible with Ventline Ventadome roof vent models V2092, V2110, V2094 and V2119. However, if you're…

view full answer...

Answer 8

The Replacement Screen Frame #BVC0573-41R is designed to fit Vents like the part #V2094SP-28 with are 14 inches by 14 inches. So the #BVC0573-41R would be right at 14 inches by 14 inches.

view full answer...

Answer 9

For your 2007 Lance 1055, the parts you need to upgrade your vent to a fan are as follows: Replacement Screen Frame with Screen, Rocker Switch, and Wire #BVC0573-41R Replacement Fan Blade #BVD0215-00 Replacement 12V DC Motor for Ventline Fans…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

How To Determine Fit of Replacement Screen, Frame, Switch, and Wire for Ventline Roof Vent

Product Page this Question was Asked From

Continue Researching