Replacement Parts to Add Fan to Non-Powered Ventline V2094 Vent in 2007 Lance 1055

Question

Question:

I have a 2007 Lance 1055 that has a nonpowered Vent Line V2094 vent in the dry bath. The wiring is there. Can you supply parts to add a fan?

asked by: Mark N

0

Expert Reply:

For your 2007 Lance 1055, the parts you need to upgrade your vent to a fan are as follows:
Replacement Screen Frame with Screen, Rocker Switch, and Wire # BVC0573-41R
Replacement Fan Blade # BVD0215-00
Replacement 12V DC Motor for Ventline Fans # BVD0218-00

These parts along with your current vent will allow you to install the fan.

expert reply by: Jason S

0

Answer 1

Thanks for the picture of your current vent! Based on the measurements you showed in your picture the correct replacement screen is the Replacement Screen Frame with Screen, Rocker Switch, and Wire for Ventline Roof Vents in Birch White #BVC0573-31R…

view full answer...

Answer 2

I tried looking up what vents came on your 2011 Coachmen Chaparral 268RLE but unfortunately it doesn't look like Coachmen kept a record of that. If you can let me know what brand you have I can see if we have a replacement screen for it as these…

view full answer...

Answer 3

The direct replacement for your Ventline screen with model number VD0434 is #BVD0434-31 (birch white) or #BVD0434-41 (polar white). This is compatible with Ventline Ventadome roof vent models V2092, V2110, V2094 and V2119. However, if you're…

view full answer...

Answer 4

All of the fans and fan motors that we offer are replacement items for roof vents that came with fans. If the roof vent in your trailer did not come with a fan, then you may be able to add a fan, but you will likely have to fabricate a mount for the…

view full answer...

Answer 5

The MaxxAir FanMate vent cover Item #MA00-955001 is going to be just a little taller but the louvred end tapers in and it does not come with the screen which is Item #MA00-955202. 25" long x 18-1/8" wide x 10-1/4" tall. The MaxxAir II…

view full answer...

Answer 6

I believe what you're looking for, for your 2016 Coachman Class C Leprechaun BHF320 is the: -Replacement Screen Frame with Screen, Rocker Switch, and Wire for Ventline Roof Vents - Polar White #BVC0573-41R. This replacement screen and frame will…

view full answer...

Answer 7

Motor #BVD0218-00 should be the correct replacement. The motor comes with new wires, a bracket, and hardware. The screws that hold the motor to its bracket can be accessed by removing the fan blade. It should just pull off of the motor shaft. You…

view full answer...

Answer 8

You can easily replace the thermostatically controlled RV ceiling fan you have in your 1999 Holiday Rambler Endeavor 37WDS with one that does not have that feature. We have the Ventline Ventadome Trailer Roof Vent part #V2094SP-28 which fits the…

view full answer...

Answer 9

The correct replacement motor you would need for your V2094 Vent is the part #BVD0218-00 that you referenced. Based on what you described it sounds like you may have damaged the old motor when you attempted to clean it.

view full answer...

Answer 10

To install the Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans #BVD0218-00C with your Ventline P, S0721, B, and T series range hood, you'll just need to disconnect the existing motor from the motor mount, and replace with the…

view full answer...

Answer 11

Thanks for the pictures! I have a couple of 6 blade, 6" long replacement fan blades but from the pictures you sent the newer ones look like they rotate the opposite direction of your current fan blades. I recommend replacing the motor as well…

view full answer...

Answer 12

The Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans #BVD0218-00 does not have a specific direction of shaft rotation. The wiring will dictate the direction of the motor. The Replacement Fan Blade for Ventline Ventadome Trailer Roof…

view full answer...