Dimensions of the Replacement Screen Vent # BVC0573-41R

Question

Question:

did not see dimensions of this part. please advise

asked by: Jess W

0

Expert Reply:

The Replacement Screen Frame # BVC0573-41R is designed to fit Vents like the part # V2094SP-28 with are 14 inches by 14 inches.

So the # BVC0573-41R would be right at 14 inches by 14 inches.

expert reply by: Jameson C

0

Answer 1

The direct replacement for your Ventline screen with model number VD0434 is #BVD0434-31 (birch white) or #BVD0434-41 (polar white). This is compatible with Ventline Ventadome roof vent models V2092, V2110, V2094 and V2119. However, if…

view full answer...

Answer 2

The Replacement Screen Frame with Screen, Rocker Switch, and Wire for Ventline Roof Vents #BVC0573-41R is going to already have a switch installed so you could just hang onto the switch you have or pop out the included one for the switch that you…

view full answer...

Answer 3

Thanks for the picture of your current vent! Based on the measurements you showed in your picture the correct replacement screen is the Replacement Screen Frame with Screen, Rocker Switch, and Wire for Ventline Roof Vents in Birch White #BVC0573-31R…

view full answer...

Answer 4

Thanks for the picture of the roof vent you have. Based on that the replacement screen you need is the part #BVC0573-31 that you referenced.

view full answer...

Answer 5

I tried looking up what vents came on your 2011 Coachmen Chaparral 268RLE but unfortunately it doesn't look like Coachmen kept a record of that. If you can let me know what brand you have I can see if we have a replacement screen for it as these…

view full answer...

Answer 6

We do have the following screens and sleeves for your Ventline V2094 roof vent on your 2013 Jayco Featherlite Hybrid X23B. I have included some parts as an assembly and some other parts based on on exactly what all you want to replace with your vent.…

view full answer...

Answer 7

I attached a picture that a coworker of mine took that shows the dimension you are looking for on the part #BVC0573-31. Looks to be right at 2-3/4 inches.

view full answer...

Answer 8

Here is an image of the measurement you requested for the Replacement Screen Frame with Screen #BVC0573-41. As the frame design on this is different from your current vent it does appear to be longer at approximately 3-1/8" to the far edge of…

view full answer...

Answer 9

The correct replacement for your bathroom vent fan is the Replacement Screen Frame with Screen, Rocker Switch, and Wire for Ventline Roof Vents part #BVC0573-31R which is designed for the VD0433. It comes with the frame, screen, and switch.

view full answer...

Answer 10

I have attached a photo you can use to connect the Replacement Power Switch #EJ-3520-PSW to your 3,500 lb RAM jack. We don't have a direct wiring diagram but if you notice even though the wires are the same colors they look pretty different so…

view full answer...

Answer 11

I attached a picture that I got from RAM jacks that shows how the RAM Jack switch part #EJ-3520-PSW that you referenced gets wired up.

view full answer...

Answer 12

The Replacement Screen for Ventline Ventadome Trailer Roof Vents - Birch White #BVD0434-31 will fall out as you mentioned if the taps are broken. The replacement I recommend is the Replacement Screen Frame with Screen, Rocker Switch, and Wire for…

view full answer...

Dimensions of the Replacement Screen Vent # BVC0573-41R

Product Page this Question was Asked From

Continue Researching