Replacement Flush Valve of Dometic 210 RV Toilet

Question

Question:

Ive got a Dometic Sealand 210 toilet. I need a replacement flush valve. From the photos it appears that the DOM55FR is the correct replacement even though it doesnt list the Sealand 210 as a model that it fits. Could you confirm this part is correct for the 210? Thanks.

asked by: John B

0

Expert Reply:

I did some checking and confirmed that the Dometic replacement flush valve # DOM55FR is the correct replacement for the Dometic Sealand 210 RV toilet you have.

expert reply by: Jameson C

0

Answer 1

Yes, the Replacement Water Valve for Pedal-Flush Dometic RV Toilet #DOM55FR will fit both toilet models (510+ and 2010). The product model identification label is located on the toilet base under the pedestal cover (see photo), just in case you…

view full answer...

Answer 2

We've checked with Reese in the past and they have told us that the #RP58112 was once the 61241 so this would work great as a replacement head.

view full answer...

Answer 3

The Reese number that you supplied is now #RP58112, a replacement head for a Reese Round Bar WD System. This head is rated at between 600-1200 lbs on the tongue weight when using the round spring bars. The max gross trailer weight when using 600…

view full answer...

Answer 4

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 5

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 6

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

The Trailer Hub and Drum Assembly part #AKHD-545-35-K is the correct replacement for an AL-KO 7230. In regards to the braking assemblies, I suggest getting a new pair, the Electric Trailer Brake Kit part #AKEBRK-35-SA. This option will save you some…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Replacement Flush Valve of Dometic 210 RV Toilet

Product Page this Question was Asked From

Continue Researching