Curt Trailer Hitch Receiver C13902 Left Frame To Right Frame Bolt Hole Separation

Question

Question:

What is the center to center distance between mounting bolt holes left to right?

asked by: Aleks

0

Expert Reply:

The Curt Trailer Hitch Receiver # C13902 is 33-7/16" from left frame to right frame hole centers when the brackets are oriented outward. Since they can also be mounted inward that would measurement would then be 31" on center from left frame to right frame mounting holes.

expert reply by: Bud M

0

Curt Trailer Hitch Receiver C13902 Left Frame To Right Frame Bolt Hole Separation
(click to enlarge)

Answer 1

Yes, the Curt Trailer Hitch Receiver #C13902 will fit your 2012 GMC Sierra Extended Cab 4x4. Attached is a clip from the instructions as well as a link to the instructions for you to reference.

view full answer...

Answer 2

I attached a picture that shows the install instructions for the Curt hitch part #C13902 that you referenced as well as attached a link to them on this page.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Curt Trailer Hitch Receiver C13902 Left Frame To Right Frame Bolt Hole Separation

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching