What Curt Trailer Hitch Receiver Will Fit On A 2022 Hyundai Tucson

Question

Question:

Est-ce que cet attelage remorque fait sur Tucson luxury hybride 2022 ainsi que le fil si il se connecte directement Sur auto . Svp donnez moi les numéros pour le hitch et le fil connecteur pour une installation sans tracas merci Does this trailer hitch fit on Tucson luxury hybrid 2022 as well as the wire if it connects directly On auto . Please give me the numbers for the hitch and the connector wire for a hassle free installation thank you

asked by: André

0

Expert Reply:

Yes the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C94WR is a confirmed fit for the 2022 Hyundai Tucson.

For your wire harness use the Curt T-Connection Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # CU94FR. This will give you your 4 flat connection to control trailer lights.

expert reply by: David B

0

Answer 1

The best option for a trailer hitch receiver for a bike rack that fits your 2022 Hyundai Tucson plug-in hybrid is from Curt, and is the following part number: - Curt Trailer Hitch Receiver #C94WR I verified with Curt that the #C94WR is a fit for your…

view full answer...

Answer 2

According to Curt, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2, part #C94WR, is compatible with all versions of the 2022 Hyundai Tuscon, including your Hyundai Tuscon Hybrid Limited.

view full answer...

Answer 3

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #CU94FR is a confirmed fit for a 2022 Hyundai Tucson per the manufacturer. These are tested on the vehicle for function prior to releasing fit. There would be no…

view full answer...

Answer 4

We do offer a Curt Class III hitch for the 2023 Kia Sportage. We offer the Curt 13485 as part #C94WR. According to Curt, the hitch fits all models of the 2023 Sportage, including the EV. Per the linked install instructions, the hitch attaches to the…

view full answer...

Answer 5

When we installed the Curt Trailer Hitch Receiver #C94WR on a 2022 Hyundai Tucson we found it to have a hitch height of 17" to the inside top of the receiver. This will put you at 14-1/2" of ground clearance to the bottom of the receiver.…

view full answer...

Answer 6

The Curt Trailer Hitch Receiver #C94WR for your 2023 Hyundai Tucson will only have the 5/8" holes for a hitch pin and clip. Curt does not offer a receiver with the type of anti-rattle hitch lock you described. We do have the Stainless Steel…

view full answer...

Answer 7

It looks like the instructions for the Curt #C94WR are back up and running. That being said, they do mention the panel that needs to be removed. We do mention that trimming may be needed to reattach this panel, but with this being as new as it is, we…

view full answer...

Answer 8

Yes, the Curt Hitch part #C94WR that you referenced does fit your 2021 Kia Sportage Hybrid model. The correct trailer wiring is the #C59236 you mentioned as well.

view full answer...

Answer 9

Yes, we have verified with Curt that the Curt trailer hitch part #C94WR is a confirmed fit for your 2022 Hyundai Tucson Plug In Hybrid.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...