OEM Rail Kit Adapter for 2022 Ram 2500 to Fit Pullrite Superglide 2700

Question

Question:

Can you tell me what puck system I would need to purchase Looking for a Puck system for Dodge Ram with a 2700 Superglide

asked by: Mark P

0

Expert Reply:

Since we know the Pullrite Superglide 2700 fits industry standard fifth wheel rails the correct adapter you'd need to fit the OEM prep package of your 2022 Ram 2500 is the Demco part # DM6099 that you referenced. This fits easily into your pucks and gives you the rails you need for your Superglide.

expert reply by: Jameson C

0

Answer 1

The Demco Hijacker AutoSlide part #DM8550034 is a great hitch for your 2017 Ram 2500 short bed with the factory rail kit. It does require the adapter part #DM6099 to be used like you referenced. The hitch as a total is pretty heavy at 273 lbs but…

view full answer...

Answer 2

The Demco 5th Wheel Rail Adapter for Ram #DM6099 weighs approximately 75-80lbs. the shipping weight is 86 lbs. but it comes with a good amount of packing material. This is one of the lightest rail adapters available. it is lighter than our Reese…

view full answer...

Answer 3

I spoke to my contact at Demco and he informed me that their Demco 5th Wheel Rail Adapter #DM6099 will add 1.38 inches to the height of the fifth wheel hitch. The Reese 5th Wheel Rail Adapter #RP30154 will add 2 inches of height to the hitch setup…

view full answer...

Answer 4

We do have an adapter that will allow you to mount your PullRite SuperGlide 5th wheel hitch to your 2021 Ram 2500 with the factory puck system, so long as the SuperGlide is the ISR series (ISR stands for Industry Standard Rails). If you do have the…

view full answer...

Answer 5

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 6

To install the Demco 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package #DM6099 for the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550034 on your 2022 Ram 3500 with OEM rail kit, you'll start by removing the…

view full answer...

Answer 7

According to my technical contact at PullRite this hitch cannot be installed in any truck larger than a 1/2-ton 1500. The PullRite Super Glide 12K 5th Wheel Hitch Model 3100 fits the 5-1/2-foot bed version of the 2014 Ram 1500. The installation kit…

view full answer...

Answer 8

If the PullRite Superglide hitch is one that was intended to fit the industry standard style of rails then yes the Demco Rail Kit adapter part #DM6099 will work with it. I attached a picture that shows a Superglide hitch installed in the rail kit for…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...