Shipping Weight Demco 5th Wheel Rail Adapter

Question

Question:

Can you please tell me the weight of the Demco Rail Adapter p/n DM6099? Thank you

asked by: Charles B

1

Helpful Expert Reply:

The Demco 5th Wheel Rail Adapter for Ram # DM6099 weighs approximately 75-80lbs. the shipping weight is 86 lbs. but it comes with a good amount of packing material. This is one of the lightest rail adapters available. it is lighter than our Reese option based on the shipping weight.

expert reply by: Timothy G

1

Answer 1

Yes, the Adapter Rails for Curt 5th Wheel Hitch - Dodge Ram Towing Prep Package #C29BR does disassemble into four pieces, in fact it comes in four pieces initially and you put it together. As for the distances, the width side to side (horizontally,…

view full answer...

Answer 2

There is indeed a Demco Hijacker Autoslide 5th wheel hitch that fits the factory puck system of your 2022 Ram 3500 so you do not have to use an adapter. In fact there are two, with the only difference being the capacity; one has an 18,000 lb capacity…

view full answer...

Answer 3

Yes, there is an auto-slide 5th wheel hitch option that will fit the puck system in your 2022 Ram 2500. - Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV This 5th wheel hitch is made in the USA and will drop into the factory prep system in your…

view full answer...

Answer 4

Installing the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box #325-GH-8045 would not void the warranty of your camper. While some adapters for fifth wheel hitches do this style is different from them and would not. The ones that…

view full answer...

Answer 5

Installing ta Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box like the #325-GH-8045 would not void the warranty of your camper, and Gen-Y makes some of the most durable parts on the market. I really like this as an alternative to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 10

As long as the RBW Lil' Rocker mounts to industry standard base rails you'll need the Curt Adapter Rails #C29BR that fit in the OEM puck system on your 2019 Ram 2500 and give you a standard base rail connection. I'm attaching a photo…

view full answer...

Answer 11

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 12

The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…

view full answer...

Shipping Weight Demco 5th Wheel Rail Adapter

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching