Is Install Video for 2021 Subaru Forester Same Process on 2022 Forester

Question

Question:

I notice that there is a demonstration for the installation of this class III hitch on a 2021 Subaru Forester. Does this same product and method apply, without question, to a 2022 Forester ?

asked by: Andrew

0

Expert Reply:

Yes, the install of the EcoHitch part # 306-X7391 is the exact same between the 2021 and 2022 models so you can use the install video for the 21' model as a guide.

expert reply by: Jameson C

0

Answer 1

The EcoHitch part #306-X7391 that you referenced was confirmed as a fit for your 2022 Subaru Forester Wilderness Edition and is the most hidden option so it would be the way to go. We also have confirmed that the Curt hitch #C13409 does fit the…

view full answer...

Answer 2

I do have an option for your 2020 Subaru Forester but I do not have a hitch option that is completely hidden when not in use. Some EcoHitches do allow you to remove the receiver for a completely hidden design but that is not available for the Subie.…

view full answer...

Answer 3

I went ahead and contacted my tech at Torklift (the makers of EcoHitch) about the #EH97FR, and he confirmed that all M12 hardware will be torqued to 70 ft/lbs and all 1/4" hardware will be torqued to 8 ft/lbs. I went ahead and attached the step…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Is Install Video for 2021 Subaru Forester Same Process on 2022 Forester

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching