Will a Gooseneck Hitch from a 2007 Dodge 2500 Fit a 2004 Dodge 2500

Question

Question:

I WAS GIVEN A HITCH FROM A 2007 DODGE 3/4 TON AND I WAS WONDERING IF IT WILL FIT ON MY 2004 DODGE 3/4?

asked by: JUSTIN W

0

Expert Reply:

Yes, it will! Lucky you. The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs item # BWGNRK1313 you were looking at fits 2003-2009 Dodge 3/4 ton trucks. I have attached an installation video.

expert reply by: Jerred H

0

Answer 1

All of the gooseneck balls for your factory hitch have a round shank. There is no adapter product to convert that round gooseneck ball receptacle to a square one that can accept the B&W Companion 5th wheel #BWRVK3500 or the flatbed version…

view full answer...

Answer 2

The Firestone Ride Rite kit part #F2299 that your 2005 Dodge Ram has installed is perfectly compatible with in-bed hitches like the B and W Turnoverball you mentioned part #BWGNRK1313 so the two will work great together without issue. The trailer…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 7

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 8

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 9

Yes, it will! The B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches item #BWRVR3200 includes industry standard 5th wheel rails that are compatible with the Reese 30032 5th wheel hitch. The Reese 30032 uses the same…

view full answer...

Answer 10

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 11

Hello Cory. I can definitely point you in the right direction, but there is not a B&W Companion option that will fit into a round gooseneck ball hole. As you said, the B&W Companion hitch is only compatible with the B&W Turnoverball…

view full answer...

Answer 12

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Will a Gooseneck Hitch from a 2007 Dodge 2500 Fit a 2004 Dodge 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching