Could Bauer Products Motorhome Door Lock Fit 2017 Thor ACE Motorhome 29.4

Question

Question:

I have a 2017 Thor ACE 29.4 and need to replace the door lock. It looks like Item # BA64FR is the one I should get. Is that right? Thanks,

asked by: Paul S

0

Expert Reply:

The Bauer Products Motorhome Door Lock part # BA64FR is a very standard size for RV doors and most likely would work great as a replacement for your 2017 Thor ACE 29.4. This fits doors that are between 1-1/4 inch to 1-1/2 inch and with cut out dimensions of 5-1/4 inch by 4-1/2 inch.

expert reply by: Jameson C

0

Answer 1

I spoke with my contact at Roadmaster who said that it takes their install team about 5 hours to install the Roadmaster InvisiBrake #RM-8700. He said that if the dealer hasn't installed one before then it could take them longer though because…

view full answer...

Answer 2

The code you have for your Trimark door lock on your 2016 Thor Axis Motorhome isn't coming back to any door locks for me to find the dimensions of it. What you'll need to do is remove the Trimark from the door and measure the height and width…

view full answer...

Answer 3

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 7

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Could Bauer Products Motorhome Door Lock Fit 2017 Thor ACE Motorhome 29.4

Product Page this Question was Asked From

Continue Researching