BOLT Trailer Coupler Lock That Fits The 2 Inch Demco EZ Latch Coupler  

A pin with a 1/4 inch diameter, like part #e98886, is standard for coupler locks. Unfortunately there are none that are 1/16 of an inch larger in diameter. If instead you meant that you needed one with a span of 5/8 of an inch then you will want to…

To be able to lock the latch on the Demco Trailer Coupler - Adjustable Channel Mount #DM14976-52 you were looking at I recommend the Bulldog Easy Access Coupler Lock #BD580409.

The lock I recommend for the Demco Channel Tongue Trailer Coupler - eZ-Latch #DM15000-52 is the etrailer Trailer Coupler Lock #e98887. This lock is going to do a great job of keeping your trailer safe and sound and will work perfectly with the Demco…

The Trimax Puck Lock for Trailer Door Hasps #TMX96RR cannot be keyed alike. While disappointing I'm sure, there is another option to consider, which is to order a quantity of two of the Trimax Puck Locks for Trailer Door Hasps #TMX73FR. The…

The Class II Curt Hitch #C12136 and Class II Draw-Tite Hitch #36493 for your 2016 Subaru Outback Wagon are very similar, but every Class I and Class II and some Class III Curt Hitches require stabilizing straps to be used when towing non trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The InfiniteRule Lock for Demco eZ-Latch #IR66FR will fit 2" and 2-5/16" couplers. This lock has an internal length of 2-15/16" to fit the pin hole on your coupler. I have linked an image below showing it on a 2-5/16" coupler in…

The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hi Ed, If I'm understanding you correctly your trailer's frame is 3" wide and the coupler needs to have a 2" ball. If so the Demco Channel Tongue Trailer Coupler #DM15000-52 you were looking at would be a compatible fit. I've…