Which Rear Sway Bar for 2021 Forest FR3 30DS with 18K GVWR

Question

Question:

i am interested in purchasing a rear anti sway bar for my 2021 Forest River 30DS motorhome. I would like to know which one would work best on my motor home. Also the difference in the sizes of the bars. 1 1/2, 1 3/4 , 1 5/8

asked by: Dwight V

0

Expert Reply:

Since your 2021 Forest River FR3 30DS is built on a Ford F-53 chassis that has an 18k GVWR the correct rear sway bar would be the # RM25VR which is a 1-3/4 inch diameter sway bar.

expert reply by: Jameson C

0

Answer 1

I checked with Roadmaster for you, and the correct steering stabilizer for your 2022 Forest River FR3 with an 18,000 lb GVWR on the Ford F-53 chassis is the following: - Roadmaster Reflex Steering Stabilizer with Mounting Brackets #RM62VR This is a…

view full answer...

Answer 2

For your 2017 Jeep Wrangler Unlimited Sport S, I recommend you start with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118416. The connection points for this adapter are behind the driver's side tail lights. Then you will…

view full answer...

Answer 3

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 4

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 5

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 6

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…

view full answer...

Answer 9

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 12

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Which Rear Sway Bar for 2021 Forest FR3 30DS with 18K GVWR

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching