bing tracking image
Q & A Icon

Recommended 7-Way And 4-Way Wiring For 2017 Jeep Wrangler Unlimited Sport S  

Question:

I also should have mentioned I will be wiring it for flat towing. That's another 4 wire flat cable to the rear. Would like to connect either 6 pin car to 7 pin RV or 7 to 7 pin and have some additional capability. Charging the toe or brake signal to the dash etc.

1

Helpful Expert Reply:

For your 2017 Jeep Wrangler Unlimited Sport S, I recommend you start with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118416. The connection points for this adapter are behind the driver's side tail lights. Then you will want to use the 7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring - Vehicle End # HM40975-11998 to hardwire to that 4-way. Next, you will want to use the Draw-Tite Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers # 5506. This will allow you to wire a brake controller and run power to your 7-way with the proper circuit breaker.

For a brake controller, I recommend the Tekonsha Prodigy P3 # 90195. This brake controller is a proportional system that will allow you to apply the brakes on your trailer with the same intensity and at the same time as you hit the brake pedal in your Jeep. It has an easy to read and understand LCD screen that takes code deciphering out of the equation. There are 3 levels of boost and it is customizable to your driving preferences.

This will be all you need to add the 7-way to your vehicle and make it fully functioning.

expert reply by:
1
Jason S

Roger

4/13/2017

I also should have mentioned I will be wiring it for flat towing. That's another 4 wire flat cable to the rear. Would like to connect either 6 pin car to 7 pin RV or 7 to 7 pin and have some additional capability. Charging the toe or brake signal to the dash etc.

Jason S.

4/13/2017

For your 2017 Jeep Wrangler Unlimited Sport S, I recommed the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This will give you a 7-way from your Motorhome RV and connect to a clean looking 6-way that will give you all the functions you need in your wiring as well as that 12V power you mentioned for a braking system and brake signal. The diodes will help protect your system while utilizing the existing vehicle wiring. Let me know if you need other recommendations for flat towing components for your vehicle.

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>