Is There A Safety Chain Kit That Will Fit Ford, Chevy, And Ram Factory Puck Systems?

Question

Question:

goose neck puck chain anchors cross ford dodge chevy

asked by: Tony

0

Expert Reply:

The Curt Safety Chain Loops # C60691 will work with Chevy, Ford, GMC, and Nissan factory underbed gooseneck trailer hitches. Dodge/Ram does use a different style puck though, so you will need the Curt Safety Chain Loops for Ram factory underbed gooseneck trailer hitch # C60617 for that.

However, if you are looking for an all inclusive kit with the ball, safety chain loops, carrying case, and a cover for the gooseneck hole when the ball isn't in use, you will want to look at the kits I have listed below. I included what all they will fit as well.

Curt Ball and Safety Chain Loop Kit # C60692
-Chevrolet:
2016 - 2022 Chevrolet Silverado 3500 8 Foot Bed
2020 - 2022 Chevrolet Silverado 3500 6-3/4 Foot Bed
2016 - 2019 Chevrolet Silverado 3500 6-1/2 Foot Bed
2016 - 2022 Chevrolet Silverado 2500 8 Foot Bed
2020 - 2022 Chevrolet Silverado 2500 6-3/4 Foot Bed
2016 - 2019 Chevrolet Silverado 2500 6-1/2 Foot Bed
-GMC:
2016 - 2022 GMC Sierra 3500 8 Foot Bed
2020 - 2022 GMC Sierra 3500 6-3/4 Foot Bed
2016 - 2019 GMC Sierra 3500 6-1/2 Foot Bed
2016 - 2022 GMC Sierra 2500 8 Foot Bed
2020 - 2022 GMC Sierra 2500 6-3/4 Foot Bed
2016 - 2019 GMC Sierra 2500 6-1/2 Foot Bed
-Ford:
2011 - 2022 Ford F-450 Super Duty 8 Foot Bed
2011 - 2022 Ford F-350 Super Duty 8 Foot Bed
2011 - 2022 Ford F-350 Super Duty 6-3/4 Foot Bed
2011 - 2022 Ford F-250 Super Duty 8 Foot Bed
2011 - 2022 Ford F-250 Super Duty 6-3/4 Foot Bed
-Nissan:
2017 to 2019 Nissan Titan XD 8 Foot Bed
2016 - 2022 Nissan Titan XD 6-1/2 Foot Bed

Curt Ball and Safety Chain Loop Kit # C60618:
-Dodge/Ram:
2013 - 2022 Ram 3500 8 Foot Bed
2013 - 2022 Ram 3500 6-1/2 Foot Bed
2014 - 2022 Ram 2500 8 Foot Bed
2014 - 2022 Ram 2500 6-1/2 Foot Bed

Unfortunately, there is not just one kit that can be used in all the factory systems from all truck manufacturers.

expert reply by: Lazer S

0

Answer 1

Yes, the pop-in style gooseneck trailer hitch balls are cross compatible between the different factory puck systems from Ford, Ram, GM, and Nissan. For this, we have a few options such as the Curt Pop-In Ball part #C60629 which has a rise built-in…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 3

The Ram kit is only a fit for Ram pickups but the Chevy kit is compatible with Ford, GM, and Nissan Titan gooseneck hitches. There are slight differences between the gooseneck hitch ball kits that fit the different brand trucks out there. For…

view full answer...

Answer 4

I am not really sure what you are trying to do but you can install a trailer hitch on the rear of a trailer. There are two different kinds of trailer hitches for trailers, frame mount and bumper mount. The frame mount hitches are much stronger but…

view full answer...

Answer 5

I recommend using the B&W Ball and Safety Chain Kit #BWGNXA2061 for the factory puck system on your 2020 Ford F-350 Super Duty. I like this kit of the Curt #C60692 and Reese #RP30137 options because it uses a handle to secure the gooseneck hitch…

view full answer...

Answer 6

The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 10

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 11

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 12

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Is There A Safety Chain Kit That Will Fit Ford, Chevy, And Ram Factory Puck Systems?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching