Roof Rack to Mount to Side of Runaway Camper

Question

Question:

The roof of a Runaway Camper is not able to support a roof rack that is bolted through the roof. The material is not sturdy enough, from what Im seeing. Its a waffle construction fiberglass. Do you sell a roof rack that mounts from the side of the wall?

asked by: Barney

0

Expert Reply:

It sounds like you're needing the Rack'Em Fitz-All Enclosed Trailer Ladder Rack # RA-28 instead. This mounts at the side of the trailer body so you'll just need to make sure you have a solid structure piece to mount it to.

expert reply by: Jon G

0

Answer 1

The Lock N Roll Articulating Coupler #336TS504 dimensions for the A-frame are 2.19" at the narrowest part and 11.22" at the widest part of the opening. It is 9.68" long from largest opening to narrowest. I have included a picture below…

view full answer...

Answer 2

The pivoting bolt or pin that the Lock N Roll Coupler part #336TS504 has is made from a hardened steel that as rigorously tested for capacity and found to be capable of handling up to 11,000 lbs of trailer weight and also meets SAE J684 towing safety…

view full answer...

Answer 3

For a hitch pin for the Lock N Roll Articulating Hitch w/ 3-Position Channel #336VS503505 I recommend the InfiniteRule Locking Pins for Lock N Roll Articulating Hitch for 2" Hitches - Qty 2 #IR59FR. This set of pins is specifically designed for…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 9

Hi Rene; I'm sure it's frustrating to have the mirror fall off, and while there are only universal towing mirrors for your 2016 Nissan Frontier, there are better ones than the clamp-on (which I also do not like). I would definitely go with…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...