Will Brophy Stake Pocket Tie Downs Fit a 2018 Chevy Silverado 2500

Question

Question:

Hi, will the TDSF fit in the stake pockets on a 2018 Silverado HD with a in plastic liner?

asked by: Cory L

1

Helpful Expert Reply:

The Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are a universal fit so while we haven't tested it out on a 2018 Chevy Silverado 2500, what I can tell you is that if you check out the dimensions of the stake pocket tie downs (see attached photo) and compare them with your bed rails and plastic liner you'll be able to determine if these will work for your truck or not.

expert reply by: Jon G

1

Will Brophy Stake Pocket Tie Downs Fit a 2018 Chevy Silverado 2500
(click to enlarge)

Answer 1

The Brophy Camper Tie Downs, part #TDSF are a universal application for full-size trucks and they will fit a Ford F-250 Super Duty. The hardware to mount the tie downs to the vehicle is included. I would also recommend the Brophy Camper Tie Downs,…

view full answer...

Answer 2

The The Brophy Camper Tie Downs #TDSF, are a universal fit kit intended to fit as many trucks as possible. While there is nothing to say that it for sure fits, looking at your pictures it seems likely that it will work for your 1968 Ford F-250 Camper…

view full answer...

Answer 3

The Brophy Stake Pocket Mounted Camper Tie Downs #TDSF you were looking at are a universal fit for most full-size, non-dually pickup trucks with straight fenders and single-wall construction. Because of this we don't have them in our fitguide for…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 9

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 10

Hey Michael, thanks for reaching out! The Timbren Active Off-Road Bumpstops #T28GR you installed on your 2018 Ford F-150 unfortunately have that reputation among users (although Timbren claims their systems provide a smooth ride). Because of this we…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Will Brophy Stake Pocket Tie Downs Fit a 2018 Chevy Silverado 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching