Front Mount Hitch Receiver For 2022 Ram 2500.

Question

Question:

What is the highest capacity front mounted hitch receiver for a 2022 Ram 2500?

asked by: David H

0

Expert Reply:

We currently only have the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # C31089 it will work on diesel or non-diesel variations of the 2022 Ram 2500.

It provides attachment points for hitch-mounted winches, spare tire carriers, snowplows, and cargo carriers to name a few.

It has a Gross trailer weight of 5,000 pounds a line pull capacity of 9,000 pounds and a vertical load limit of 500 pounds. The receiver opening is 2X2 inches with a pin hole diameter of 5/8 of an inch.

expert reply by: David B

0

Answer 1

A 205/75-15 size tire can actually fit on a wheel from 5 to 6-1/2 inches wide. With that being said, it's generally better to go with the thinnest wheel your tire fits on because that puts the weight on the wheel in the most vertical position…

view full answer...

Answer 2

Any given tire will fit a range of rim widths. The ST225/75-15 tire will fit 6, 6-1/2, and 7 inch rims, but not a 5 inch rim. The tire will not be able to seat properly on the rim and you will not be able to keep air in it or safely use it. As far…

view full answer...

Answer 3

For your 2019 Ram 2500, you'll want to go with the Curt #C31089 front mounted receiver hitch. The hitch would use existing frame holes, so no drilling is required but depending on your truck's trim level, you might need to trim a…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Good morning, Rich. I do have one resource which you should find helpful. I am sorry to say that at this time we do not have any pictures of videos of the Curt #C62ZV hitch being installed on a Cadillac Lyriq. Reason being we have not had this…

view full answer...

Front Mount Hitch Receiver For 2022 Ram 2500.

Continue Researching