Comparing Thule SUP Taxi Stand-Up Paddleboard Carriers 810001 and 810XT

Question

Question:

Hi there, Can you help me understand the difference between these two part numbers? I understand that TH810001 replaced 810XT, but cannot find much documentation on the change. Was it just a minor revision?

asked by: Drew

0

Expert Reply:

The Thule SUP Taxi XT Stand-Up Paddleboard Carrier part # TH810001 indeed replaced the TH810XT. The changes were very minor, the main one aside from aesthetics is the longer strap (53" vs. 74"). They also changed the way the strap is secured into the opposite end of the carrier to make things a bit easier. They both have the same speed-link mounting system and one-key locks.

expert reply by: Conner L

0

Answer 1

We have a good option for a SUP carrier that can lock your boards, but the Thule Compass Kayak and SUP Carrier #TH890000 doesn't have a locking system and isn't really feasible to lock with a cable as that would be pretty unwieldly. Instead,…

view full answer...

Answer 2

I do have an option for you but the Thule Xsporter Pro Shift Overland Truck Bed Rack part #TH54RR is a mid height rack so you won't be able to carry elongated items over the cab. Instead, I recommend the Thule Xsporter Pro Adjustable Height Truck…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 5

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 6

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 7

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 8

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 9

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

view full answer...

Answer 10

At this time there is only one ladder rack that is compatible with a tonneau cover for your 2024 Toyota Tundra. The rack is the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-5955. However, this does depend on the tonneau cover you have…

view full answer...

Comparing Thule SUP Taxi Stand-Up Paddleboard Carriers 810001 and 810XT

Product Page this Question was Asked From

Continue Researching