What Plug-and-Play Wiring Harness Works with the Curt Spectrum for My 2022 Jeep Grand Cherokee?

Question

Question:

i have a 7-way already installed on my 2022 Jeep grand Cherokee as well as a tow package. What plug and play wiring harness do I need for the curt spectrum C51170?

asked by: Glen

0

Expert Reply:

For the correct plug-and-play wiring harness to go with the Curt Spectrum Trailer Brake Controller # C51170 on your 2022 Jeep Grand Cherokee with a 7-way and tow package, that is the Curt Custom Wiring Adapter for Trailer Brake Controllers # C51446. With this adapter, you will be able to simply plug in the Spectrum wiring right into the port under your dash for easy installation.

expert reply by: Bob C

0

Answer 1

Yes, you can connect the yellow wire of the Curt Trailer Connector and Back-up Alarm, #C57102, to the back-up light circuit on your 2001 Jeep Grand Cherokee. Connecting the yellow wire will allow the back-up alarm to activate when you put your Jeep…

view full answer...

Answer 2

Yes, there is a brake controller plug under the dash on a 2022 Jeep Grand Cherokee L. I recommend using the Curt Echo Under-Dash Trailer Brake Controller part #C27JR with the Curt Custom Wiring Adapter for Trailer Brake Controllers part #C51446.…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...