Front Mount Hitch for 2022 Ford F-350

Question

Question:

Is there a front mount hitch fit for a 2022 Ford F350, single rear wheel long bed?

asked by: Moe

0

Expert Reply:

There sure is!

I'd recommend the Curt # C13078 which fits SRW models of the 2022 Ford F350. I'll link to a photo showing what the hitch looks like once installed.

The # C31018 you'd looked at fits an older Ford Super Duty, and wouldn't work with your truck.

expert reply by: Mike L

0

Installed Appearance of Curt C31078 Front Mount Receiver on 14th Gen Ford F-350 Super Duty
(click to enlarge)

Answer 1

When a tire is attached to the universal spare tire carrier, #6715, the tire will be at a slight angle; maybe 10 degrees off from a straight up and down 90 degrees. The top of the tire will be slightly closer to the vehicle than the bottom like in…

view full answer...

Answer 2

You are correct, the 2017 Toyota Prius that you have can only be towed on a dolly behind a motorhome. Good news is it won't put miles on the vehicle since the drive wheels will be on the dolly. I like dolly setups over tow bar setups for a number…

view full answer...

Answer 3

I calculated the overall diameter and width of your tire and then went out to my warehouse to determine how your tire would fit on the Curt Hitch Mounted Spare Tire Carrier, #C31006. I found that the furthest forward part of your spare tire would sit…

view full answer...

Answer 4

On the Draw-Tite Universal Spare Tire Carrier #6715 the distance from the top of the horizontal shank (which fits into your 2-inch hitch receiver opening) up to the center of the spare tire mounting plate is 17-1/2-inches, according to my contact at…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

view full answer...

Answer 11

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Front Mount Hitch for 2022 Ford F-350

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching