Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(46 reviews)
Price: $250.44
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13078
Retail:$582.85
Our Price: $250.44
You Save: $332.41
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (46)
- Q & A (0)
- Photos
CURT Trailer Hitch - C13078
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Visible Cross Tube
- CURT
- 300 lbs TW
- 5000 lbs WD GTW
- 500 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 5,000 lbs
- Maximum tongue weight: 300 lbs
- Maximum TW when used with weight distribution: 500 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13078 CURT Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2011 - 2017 Nissan Quest
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
- Product did not meet expectations
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13078
Average Customer Rating: 4.7 out of 5 stars (46 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Ardis06/26/2020
2013 Nissan Quest
Product was a perfect fit. Everything the video showed how to install was easily explained. Glad i looked them up.
by: Luis05/29/2022
Very easy to install, best fit of all receiver I have installed
Luis
6/11/2023
Great
Mike L.
7/12/2023
@Luis We're glad the Curt # C13078 hitch is still working well for you!
Helpful Links
by: Douglas08/12/2021
2012 Nissan Quest
I had it put on my Nissan Quest today. It looks great and feels like it's going to get the job done.Shipping wasn't so fast but that's on the delivery people. That said free shipping was awesome. The guys who put it on said " you did good." Meaning I purchased a superior product. First trip with it is this weekend and it looks like it'll do the job. Thanks etrailer!
by: Siegfried02/18/2023
2011 Nissan Quest
I orderd a hitch for a 2011 Nissan Quest, but you sent a Hitch who fits Ford Explorer / Licoln Aviator. No way this hitch fit on the Nissan Quest.
Katrina B.
2/21/2023
Hm......so this hitch is only a confirmed fit for the Nissan Quest. It sounds to me like you indeed got the wrong hitch. Our customer service department will be reaching out to you about a return.
by: Michael01/10/2022
Great value! I think it looks great on my vehicle. Easy to install thanks to the instruction video. Great communication.
by: Nickie09/01/2020
Got perfect and went on quickly with just a few hand tools and was even able to install it myself!
by: Marco08/23/2023
I got everything on time and it’s working good and also high quality
by: Rick 08/15/2023
Great time frame for delivery, quality product!
by: Lori04/05/2019
This hitch is so incompatible for the car it is intended for. I could not enter most driveways that had any slope, gas stations especially, without the hitch dragging on the ground.
Now I am stuck with it. I will try to sell it but....
Mike L.
4/6/2019
Because minivans typically have little ground clearance at the rear, what you describe is unavoidable. There is unfortunately no other place for the hitch to go due to the location of the rear bumper.
by: Justin 04/20/2021
Nissan Quest
Hitch bolted up like it was factory. It took a bit of work to clean the threads out in the frame after 50000 miles of salt and dirt buildup. This hitch has only had light duty use pulling a kayak trailer. It is tucked up tight to the bottom of the bumper, yet it does occasionally drag going in and out of parking lot entries. I would recommend this to anyone who wants a quality 2" hitch for their Quest at a fair price.
by: Philip02/24/2013
2013 Nissan Quest
Installed on our 2013 Nissan Quest SV. The challenging parts of this installation are:
(1) Lifting the heavy, awkward bar into place to attach the first bolt - best to have two adults for this. I supported the center of the bar on a cinderblock, lifted one end of the bar into place against the framerail, and had my wife insert a screwdriver through the hole from inside the trunk to hold it in place until I could insert the bolts from underneath.
AND
(2) working around the exhaust pipe on the passenger side. It may be worth unhooking the exhaust hanger; I was eventually able to hold the exhaust pipe far enough to the side to access the bolts from underneath. I also had minor interference on the passenger side with a small bolt that attaches the bumper assembly; had to carefully fit the provided washer past it.
It's also fairly challenging to reinsert the rubber plugs over the holes inside the trunk, particularly where they're partially obstructed on the passenger side.
This is the second etrailer hitch assembly I've installed, and while both were quality products, installation was considerably more difficult on the Quest.
by: Gerardo05/16/2022
Fit perfect very happy with the product. It's worth the buy.
by: Ernie10/19/2018
Thank you so much!! Great service! They called to make sure that there were no security issues before allowing the purchase. Items arrived MUCH faster than expected! Installed hardware with ease with all supplied new bolts. The electrical package was all pretty much plug and play and easy to install. I wish it came with a mounting bracket for the trailer plug to make it stationary. My only other critique is that the "etrailer.com" sticker is upside down. Great job everyone! Thanks!!
PS. Send me another sticker so I can fix it. Hehe.
by: Mary03/24/2018
2015 Nissan Quest
An excellent product that came in a timely manner to a person who ordered incorrectly (me) because I’ve always had trucks before and this is for a VAN. Now said hitch drags the ground on occasion. Still a useful product, note to self: you drive a van now, take care to order appropriate sizes.
by: Coleman12/07/2017
I chose this hitch because of the way it is so well made. After reviewing the video of the installation onto the exact vehicle as needed and comparing it to my vehicle I saw it was an exact match. I installed it by myself using a pair of ramps to back the rear wheels up to raise the rear of the vehicle. With the use of a couple 6 x 6 and 3 x 6 wooden blocks to help support the hitch the bolting installation was a perfect match. Well done, Curt at etrailer! The wiring harness is perfect match for the vehicle.
by: Raymond05/02/2019
2016 Nissan Quest
Arrived packaged better than the first one I tried from the large online retailer. Well built. Same issues with ONE bolt location. 2016 Nissan Quest. Rear vertical underside bolt does not line up. See pic. So if you own this van plan on needing to get a pro to drill or bend the existing body bolt out of he way to enable the hitch bolt enough room to be threaded in. The washer cannot get past the body bolt to lay flat and even if you omit the washer (not wise) the bolt head cannot get past it. Once you get so far the socket keeps getting pushed off. So I've got to throw myself on the mercy of a shop now to bend that body section away and perhaps re-thread.
Not just a bolt right on job - at least for a Nissan Quest.
Also, beware of possible older hitches out there - there are apparently discontinued hitches out there getting sold on Ama--- as new.
At least go to a legit online retailer such as this.
by: Ralph B08/22/2017
Perfect fit. No need to remove exhaust hanger. Hitch was well-packaged and free of scratches/digs/defects. Instructions on-line at etrailer.com were especially detailed and helpful.
by: Margo05/10/2020
Arrived fast. Husband already installed it. Ready to haul our bikes. Thats why we got it for our bike rack that only works with a hitch. Man it's a great hitch, prolly more than we need for bikes:)
by: Jeffrey 08/12/2020
wow!!! I ordered a hitch and some other things that I needed quickly. Courtney was awesome to work with. I was a littke bumbed that they are not doing will call pickup right now but I litterally received my items on my front porch before noon the next day and I ordered at 7:00pm the night before. I will be a repeat customer thanks to Courtney and her going the extra mile for me. Thanks!!
by: Leakyroof07/03/2022
The install was easy with the instructions provided !
by: Jonathan05/02/2018
2014 Nissan Quest
Product installed as advertised. Instructions and videos on the website were very helpful.
by: Rob C.03/19/2022
2015 Nissan Quest
Item arrived on time and in good condition. Instructions were included and installation was easy. The hitch fit perfectly and all accessories were included.
by: Eric 09/04/2020
2017 Nissan Quest
I was pleased with the products I ordered. The videos for installation were very accurate and very helpful. My order arrived on time. I will gladly continue ordering from etrailer. Thank you
by: Doug M.04/08/2014
Nissan Quest
Great product. Goes on perfectly. It is important to drop the back of the exhaust on the Quest. We connected the passenger side first to give us greatest flexibility in dealing with the exhaust.
by: Lori02/27/2019
Installed fine. This model of van has a low profile so I am limited as to how long a carriage I can use.
25
53
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch for 2017 Nissan QuestThere is a fit for a trailer hitch on a 2017 Nissan Quest. I confirmed with Curt that if your '17 Quest is a Platinum, S, SL or SV model then the Curt Trailer Hitch # C12061 is a fit.
view full answer... - Recommend Hitch for a 2017 Nissan Quest I have a solution for you but the Curt Trailer Hitch Receiver item # C13078 you were looking at only has a 300 lbs tongue weight capacity. To haul your mobility scooter and carrier you will want the Draw-Tite Max-E-Loader Trailer Hitch Receiver item # 75714. This hitch has a 500 lbs tongue weight capacity. The Draw-Tite is custom fit and bolts directly to your 2017 Nissan Quest's frame with included hardware. I have linked an installation video below. You won't need a class IV hitch but...
view full answer... - Trailer Hitch Recommendation for a 2011 Nissan QuestThe Curt trailer hitch, # C13078, does not require stacked washers for isntallation on a 2011 Nissan Quest. I have included a link to the installation instructions for you to view. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, a hitch pin and clip, and a carrying bag. For trailer wiring, use # 118547. I have included a link to the wiring instructions as well. The Draw-Tite hitch you referenced, and Hidden...
view full answer... - Recommended New Trailer Weight and WD System Setup for a 2012 Nissan QuestLet's start off by talking about the correct trailer weight for you to pull with your 2012 Nissan Quest. There are a few different factors that come into play when picking out a trailer that your tow vehicle can haul; the weight capacity of the tow vehicle, and the weight capacity of the trailer hitch receiver that is installed. For example; the weight capacity of your Quest is 3,500 lbs. If you were to install the Curt Class III # C13078 you would be able to use the 300 lbs Tongue Weight...
view full answer... - Front Mount Hitch for 2022 Ford F-350There sure is! I'd recommend the Curt # C13078 which fits SRW models of the 2022 Ford F350. I'll link to a photo showing what the hitch looks like once installed. The # C31018 you'd looked at fits an older Ford Super Duty, and wouldn't work with your truck.
view full answer...
- Is the Installation of the Curt # C13078 the Same for a 2017 Nissan Quest as it is for a 2016 QuestYes, the installation of the Curt Trailer Hitch Receiver # C13078 on your 2017 Nissan Quest will be the same as in the installation video for the 2016 Quest. I have linked the installation details for you to check out as well. If you let me know what you will be using the trailer hitch for I can make additional recommendations if need be.
view full answer... - Trailer Hitch Receiver to Fit a 2017 Nissan QuestThe Draw-Tite hitch you were looking at, part # 75278, fits GM vans of the late 1990's and early 2000's. Trailer hitch receivers are custom designed for specific vehicles so that they install in the best possible location. The correct hitch for your 2017 Nissan Quest is the Curt part # C13078. It bolts onto existing mouting locations on your van so there's no drilling. I've linked an install video on a 2016 Quest which is the same generation so the process is the same. If you're going...
view full answer... - Trailer Hitch for 2012 Nissan Quest Towing Pop Up CamperA Class III hitch like the Curt part # C13078 that fits your 2012 Nissan Quest would be your best option for towing a small pop up camper with since it has a higher towing capacity. Then for trailer wiring your best option would be the Tekonsha part # 118547 as it has the easiest install install and most reliable converter box. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch...
view full answer... - Parts Needed To Tow Travel Trailer With 2015 Nissan QuestCongratulations on the new trailer! I looked up your new 2021 Jayco 154BH travel trailer, and it has a Gross Vehicle Weight Rating (GVWR) of 3450lbs. Your 2015 Nissan Quest has a maximum towing capacity of 3500lbs, which matches the Curt Trailer Hitch Receiver # C13078 you have and means you will be able to tow the trailer but you will need a few things first. When looking in the owners manual for your Nissan Quest it does mentioned that Nissan requires trailer brakes for any trailer...
view full answer... - Recommended Towing Components Needed for 2014 Nissan QuestIn addition to the Curt # C13078 and the Hopkins Plug In-Simple 4 way Wiring Harness # HM11143674, you'll need a ball mount, hitch ball, hitch pin and clip. You can use something like the etrailer Ball Mount Kit # 989900 which has 2 ball mounts with varying rise/drops, a 1-7/8" and 2" hitch ball, hitch pin, clip and storage bag; this is the ideal solution for someone who tows a few different trailers that may require different ball mounts to tow each one level, and doesn't exactly know...
view full answer... - Correct Trailer Hitch and Trailer Wiring Harness for 2017 Nissan QuestAccording to Curt, the # C13900 is a fit for the Nissan Frontier and the small Nissan Pickup that predated it but they don't list the Quest as a fit. I'd recommend using the Curt # C13078 Class III hitch which is specifically designed for your 2017 Quest. If you'll be using the hitch for towing purposes, you'll also need the # C56342 trailer wiring harness, a ball mount like # 40346 (use in the rise position) and a 1-7/8 inch ball like # 19260 or a 2 inch ball like # C40004. You'd also...
view full answer... - Troubleshooting Rear End Sag or Squat on 2015 Nissan QuestSuspension Enhancement would assist with keeping your vehicle from dropping in the rear. Unfortunately there is not currently any vehicle suspension enhancement from any of our manufacturers that is confirmed to fit your 2015 Nissan Quest. Unfortunately that means air springs are currently not an option to help level your vehicle under load. You're best option is to work on your weight distribution system head adjustment to give you less drop at your vehicle and still give you the support...
view full answer... - Which Trailer Hitch Offers Best Ground Clearance for a 2015 Nissan QuestThe Curt Trailer Hitch Receiver part # C13078 offers the best ground clearance for a 2015 Nissan Quest as it measures 12-3/4" from the ground to the top inside edge of the receiver tube when compared to the Draw-Tite Max-E-Loader Trailer Hitch Receiver part # 75714 which hangs slightly lower at 12" from the ground to the top inside edge of the receiver tube.
view full answer... - Do etrailer & Curt Hitch For 2016 Nissan Quest Have Same Ground ClearanceThe ground clearance is going to be the same for you 2016 Nissan Quest with both the Curt Trailer Hitch Receiver # C13078 and etrailer Trailer Hitch Receiver # e98KR. These are actually the same hitch, just with a different powder coat, which is why the clearance is the same. There isn't another hitch with better ground clearance, it's just unfortunately how the Quest (and similar vehicles) are built, staying pretty low to the ground overall.
view full answer... - Trouble Aligning Trailer Hitch Holes on a 2016 Nissan QuestThe Curt Trailer Hitch Receiver part # C13078 is indeed a correct fit for your 2016 Nissan Quest. I have taken a look at the photo you attached and it looks like you are using the wrong set of holes. The trailer hitch will need to move back one set of holes which you can see in the attached photo. For reference, the two holes on the bracket are spaced 3.027" apart on center. Please let me know if you still run into issues using the other set of bolt holes. I have attached an install video...
view full answer...
- Weight Distribution System for Use with Draw-Tite Class III Hitch # 75714 on 2014 Nissan QuestThe particular Class III Draw-Tite hitch that you referenced, part # 75714, is not rated for use with a weight distribution system. This is noted in our product specs for this hitch. Of the three Class III hitches offered for your 2014 Nissan Quest (please see the link provided for you) only one hitch, the Curt # C13078, is rated for use with weight distribution. Its tongue weight capacity becomes 500-lbs and its towing capacity becomes 5000-lbs with a system installed. In general a...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Jameson C
Video by:
Joshua S
Video by:
Kathleen M
Video by:
Dustin K
Video by:
Shane H
Test Fit:
Nicholas E
Test Fit:
Hayden R
Video Edited:
Jacob T
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ardis
6/27/2021
Working fine