Wire Size Gauge on 7-way Pre-wired Connector, part # 20023

Question

Question:

On this part, could you please tell me what the wire size gauge is for each of the seven wires?

asked by: Mike

0

Expert Reply:

The 7-Way Pre-Wired Car Connector, 7 foot Lead, item # 20023, has 7 wires. The white and black wires are 10 gauge, the blue wire is 12 gauge, and the brown, red, yellow and green wires are 14 gauge. The connector allows you to have your trailer wiring in the bed of your truck for towing 5th wheel and gooseneck trailers.

expert reply by: DeAnne T

0

Answer 1

You might be able to use the Hopkins #41157 if your 7-way is capable of unplugging from the wiring harness. If you take a look at the install video for the 41157 (click provided link), you can see how the harness unplugs from the back of the 7-way.…

view full answer...

Answer 2

For a 1998 Chevrolet K Series 3500 Pickup, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver Class IV - 2" #41901. This is an extremely sturdy hitch that is easy to install. It will fit a standard or step bumper. For a roll-pan…

view full answer...

Answer 3

To see a couple diagrams that show how the 6-way to 7-way adapter part #47435 is wired up check out the pictures I attached. The 6-way of this adapter has the center pin as the 12 volt circuit. That is the usual circuit that gets moved around on…

view full answer...

Answer 4

The brake controller I recommend for your 1997 Chevrolet pickup is the Tekonsha P3 #90195. This is a proportional brake controller that applies the brakes in direct proportion to the braking action as the truck. This unit will work with electric or…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Wire Size Gauge on 7-way Pre-wired Connector, part # 20023

Product Page this Question was Asked From

Continue Researching