Recommended Hubs for 80's Shorelandr Boat Trailer with 5 Bolt Hubs and 8" Wheel
Question:
I have a 1989 Shorelandr boat trailer. I want to replace the hub assembly. I removed the hub and the old one has bearings L44649. Also, it appears that it is a 5 on 4 1/2 hub. However, it has 8 wheels 4.80. Which would be the correct hub assembly and which would be the correct bearing buddies for this?
asked by: Mark F
Expert Reply:
The CE Smith Trailer Hub Assembly part # CE13311 will be a fit for your 1989 Shorelandr boat trailer. These hubs use L44649 bearings, a 5 on 4-1/2" bolt pattern, and will work with 8" wheels. They will then work with the CE Smith Bearing Protectors part # CE16271 if you want to opt for easy greasing. The hubs are pre-greased so you don't have to worry about packing the bearings.
Products Referenced in This Question
CE Smith Bearing Protectors w/ Covers for 1.985" Hub Bore - Chrome - 1 Pair
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- CE Smith
more information >
Continue Researching
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-2K Review
- Shop: Dexter Trailer Idler Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,200 lbs
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: Loctite High Performance Synthetic Grease - 14.1 oz Can
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel - 8" Wheels - Qty 1
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Q&A: Can a Smaller Wheel and Tire Be Used on a Trailer If the Capacity is High Enough
- Q&A: What is Smallest Tire Size that Can Fit CE Smith Trailer Axle # CE33201GA-HUB
- Search Results: l44649
- Q&A: Available Galvanized Axles For Boat Trailer
- Q&A: What is the Highest Capacity and Highest Speed Rated 12 Inch Wheels With Good Corrosion Resistance
- Q&A: Replacement Axle Assembly for Small Boat Trailer
- Q&A: What Wheels Will Fit the Trailer Axle part # CE33201GA-HUB
- Q&A: Replacement 2K Axle Recommendation with 46.5 Inch Spring Centers
- Video: Review of CE Smith Trailer Axles - Leaf Spring Suspension - CE33201GA-HUB
- Video: CE Smith Trailer Fenders CE26061G-2 Review
- Video: CE Smith Trailer Suspension - Leaf Spring Suspension - CE23102 Review
- Video: Review of Trailer Leaf Spring Suspension - Spring Mounting Hardware - 166079
- Video: CE Smith Mounting Brackets for Trailer Fenders Installation
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: axle
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Search Results: bearing buddy
- Search Results: leaf spring
- Article: Trailer Tire Sizing
on Trailer Hubs and Drums
