Does The Curt Trailer Hittch Receiver 13454 Fit A 2022 Ford Escape With Titanium Package

Question

Question:

Does the Curt 13454 hitch fit a 2022 Ford escape titanium?

asked by: Manuel

0

Expert Reply:

Yes, the Curt Trailer hitch Reciever # C23FR will fit your 2022 Ford Escape with the titanium package. This hitch will fit all models of the 2022 Ford Escape including the Titanium package.

expert reply by: Bryce D

0

Answer 1

Since your 2014 Ford Escape has a naked roof, you can simply add a roof rack system that clamps onto your door jambs, so you don't need to spend the extra $600 to get additional side rails. We have the perfect option for '14 Escape,…

view full answer...

Answer 2

We do have a trailer hitch confirmed to fit all models of the 2020 Ford Escape, including the Hybrid - the etrailer Class III Hitch Receiver #e89YR. This has a 2 inch receiver and a tongue weight capacity of 525 lbs, perfectly suitable for a bike…

view full answer...

Answer 3

When it comes to the Curt Trailer Hitch Receiver #C23FR compared to the Draw-Tite Trailer Hitch Receiver #DR47FR for your 2020 Ford Escape there are a couple of differences between the two that I'll go over for you. The first is the style, with…

view full answer...

Answer 4

The main difference between the Curt #C23FR and etrailer #e89YR for your 2022 Ford Escape is the finishes. The Curt #C23FR has a glossy black finish and the etrailer #e89YR has a matte black finish. Their capacities and installations are the same. It…

view full answer...

Answer 5

I just confirmed with Curt. Depending on which model of hybrid your 2022 Ford Escape is the Curt item #C23FR will fit. The hitch will fit the standard hybrid models, but it will not fit the PHEV, or plug-in models. I have linked an installation…

view full answer...

Answer 6

Both the #C23FR (Curt 13454) and the CU56FR (Curt 13436) are fits for a 4th generation Ford Escape, however the CU56FR which isn't a fit for the popular Escape Hybrid has been phased out in favor of the redesigned #C23FR which DOES fit the…

view full answer...

Answer 7

For your 2022 Ford Escape Hybrid we have the etrailer hitch part #e89YR as a confirmed fit which is a really great option. It's mostly hidden and has great towing capacities as well. Only the hitch opening hangs below the rear bumper which allows…

view full answer...

Answer 8

The correct suspension enhancement air springs for your 2024 Ford Escape are the Air Lift 1000 Air Helper Springs for Coil Springs #AL32WQ.

view full answer...

Answer 9

For your 2020 Ford Escape Hybrid Titanium the Curt hitch part #C23FR would be a great option for a 2 inch hitch. It has a mostly hidden appearance which allows it to be slightly less visible and also has great ground clearance with the best towing…

view full answer...

Answer 10

When you install an aftermarket part on your vehicle like a trailer hitch in this case, you are protected by the Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part caused a problem then the warranty cannot…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Does The Curt Trailer Hittch Receiver 13454 Fit A 2022 Ford Escape With Titanium Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching