How Heavy Are The TorkLift GlowStep Camper Scissor Steps

Question

Question:

Item # TLA7506 - I understand the weight capacity is 300 lb. However - what is the weight of the item?

asked by: Cilla D

0

Expert Reply:

The TorkLift GlowStep Camper Scissor Steps - 6 Steps - Aluminum - 20" Wide - 300 lbs # TLA7506 are approximately 30 pounds and have a shipping weight of 34 pounds.

expert reply by: David B

0

Answer 1

We have Torklift scissor steps that have 6 steps like the Torklift part #TLA7806 or the part #TLA7506-8000 that come with the landing gear on the bottom of them. Or if you wanted the permanent mount style that also come with the landing gear you…

view full answer...

Answer 2

The Brophy Camper Scissor Steps #AS25 have 7-inches of rise between steps and an extended height of 40-48-inches. The TorkLift GlowStep Camper Scissor Steps #TLA7506 have 7-1/2-inches of rise between steps and a mounting bracket height of…

view full answer...

Answer 3

The largest Brophy Camper Scissor Step Assembly we currently have available is the 5-Step #AS25. These are 8-3/4 inch deep and 24 inch wide aluminum camper steps that can expand from 40 inches to 48 inches tall. The mounting bracket and hardware are…

view full answer...

Answer 4

The Malone SteelTop Roof Rack- 65" #MPG203 will fit your 2017 Subaru Forester. The 50" #MPG201 and 58" #MPG202 are recommended because they won't stick out too far past the body of your Forester. It is not recommended to have your…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 11

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 12

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

How Heavy Are The TorkLift GlowStep Camper Scissor Steps

Product Page this Question was Asked From

Continue Researching