How Easy Is It To Remove The Canister Of The Pace Edwards JackRabbit Retractable Hard Tonneau Cover

Question

Question:

How difficult is it to remove the canister to use the full bed on a 2019 f250 standard bed.

asked by: Martin V

0

Expert Reply:

To remove the canister of the Pace Edwards JackRabbit Retractable Hard Tonneau Cover # 311-JRFA18A44 you would need to remove the rails as well because they slide into the canister. The rails simply clamp onto the inner lip of your 2019 Ford F-250's bedrails though so taking it out wouldn't take you more than 10 minutes.

expert reply by: Kevin C

0

Answer 1

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 2

I spoke with Pace Edwards and they sent me an install instructions sheet for replacing the cover of a Pace Edwards JackRabbit Tonneau Cover. I attached the instructions to this page for you to check out. You do have to rewind the cover's spring…

view full answer...

Answer 3

I would be happy to help you. The RetraxPRO XR Hard Tonneau Cover item #RTT-80384 is the correct tonneau cover for the 8 foot bed model 2022 Ford F-350. I recommend the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers…

view full answer...

Answer 4

Typically if a Pace Edwards Retractable Tonneau Cover like the #311-M-BLFA18A44 is getting hung up it's with the railing and would require lubrication. The canister is a closed system so there isn't a good way to get into it and see if the…

view full answer...

Answer 5

I reached out to my contact at Pace Edwards about the Pace Edwards UltraGroove #311-KMC95A17 you mentioned and he said that it sounds like you don't have enough side-to-side space. Double check the dimensions that are in the installation…

view full answer...

Answer 6

I do have an option for you but the Adarac Pro Series Custom Truck Bed Ladder Rack part #A4000952 for 2017-2020 Ford F-250 Super Duty 6-3/4 foot bed will not fit the bed rails with the rails for the Pace Edwards JackRabbit Retractable Hard Tonneau…

view full answer...

Answer 7

The Pace Edwards JackRabbit #311-JRFA18A44 has a weather-resistant, padded ArmorTek deck laminated to rigid aluminum panels to provide a soft cover look with hard cover security. The Pace Edwards Full-Metal JackRabbit #311-FMFA18A44 is a full metal,…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...