Fit of Blaylock EZ Lock Gooseneck Coupler Lock # BLTL-50-40D on Gooseneck Coupler

Question

Question:

Am trying to determine if the BLTL-50-40D will fit the gooseneck coupler in the photos below as there are no brand markings on the coupler. It does have a football shaped base plate that is 7.5-7.75inch long.

asked by: Stephan H

0

Expert Reply:

Thanks for the pictures of your gooseneck coupler. Based on seeing them we do know that the Blaylock EZ Lock Gooseneck Coupler Lock # BLTL-50-40D does fit.

expert reply by: Jameson C

0

Gooseneck Coupler
(click to enlarge)

Gooseneck Coupler Side View
(click to enlarge)

Answer 1

Currently Goodyear is one of the few trailer tire manufacturer that makes tires in the USA and the only one that we carry. Unfortunately they do not currently offer a tire size of 235/80-16.

view full answer...

Answer 2

The Blaylock EZ Lock Gooseneck Coupler Lock part #BLTL-50-40D that you referenced works with most adjustable gooseneck couplers therefore it should work with yours as well and after looking at your photos I don't see any apparent issues. That…

view full answer...

Answer 3

I contacted our representative, Blaylock, to inquire about this EZ lock coupler #BLTL-50 working with Bravo products. He wasn't certain if it is compatible but he provided me measurements. See diagram to the right. The short bed extender by Pop…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 11

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 12

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Fit of Blaylock EZ Lock Gooseneck Coupler Lock # BLTL-50-40D on Gooseneck Coupler

Product Page this Question was Asked From

Continue Researching