Recommended Coupler Lock To Fit on a Bravo Gooseneck Trailer

Question

Question:

For my Bravo gooseneck trailer, I use a short bed extender made by Pop Up Industries, SB series. Will the Blaylock EZ Lock Coupler lock BLTL-50 fit on this extender?

asked by: Steve H

0

Expert Reply:

I contacted our representative, Blaylock, to inquire about this EZ lock coupler # BLTL-50 working with Bravo products. He wasn't certain if it is compatible but he provided me measurements. See diagram to the right.

The short bed extender by Pop Up SB series you have works with most Bulldog, Stallion, Superior, and T.E.M. gooseneck couplers. Other couplers may work but I recommend using the diagram to the right to view the measurements of the Blaylock EZ lock coupler.

We also sell this lock with this Master Lock padlock included. It's part # BLTL-50-40D.

I included a couple video links for you as well.

expert reply by: Chris B

0

click to enlarge

Answer 1

The Blaylock EZ Lock Gooseneck Coupler Lock part #BLTL-50-40D that you referenced works with most adjustable gooseneck couplers therefore it should work with yours as well and after looking at your photos I don't see any apparent issues.…

view full answer...

Answer 2

The EZ Lock Gooseneck Coupler Lock Combo #BLTL-53-40D2 will work well for your Bulldog Gooseneck Adjustable Coupler #BD0289250300. Unfortunately we have not yet had a chance to test the lock on a 0289340317 coupler to be sure of the fit. I have…

view full answer...

Answer 3

The physical difference in terms of appearance between various well-known gooseneck coupler manufacturers is hard to spot because they all are fairly similar. The biggest difference comes with the width of the coupler flange. The best way to…

view full answer...

Answer 4

Thank you for your photo of a gooseneck coupler lock which is similar to the Blaylock EZ Lock Gooseneck Coupler Lock #BLTL-50. We do have gooseneck coupler locks for various brands of couplers. Locks #BLTL-50 and #BLTL-50-40D will fit on Bulldog,…

view full answer...

Answer 5

Based on my research, PJ trailers outfit their trailer with a Bulldog gooseneck coupler. As long as your trailer still has a Bulldog coupler, you will want to use Baylock EZ Lock Gooseneck Coupler Lock - Bulldog/Stallion/Superior/T.E.M. Gooseneck…

view full answer...

Answer 6

Thanks for the picture of your gooseneck coupler, based on that I can tell that the Blaylock EZ Lock Gooseneck Coupler Lock #BLTL-50-40D that you referenced will fit and work well.

view full answer...

Answer 7

First, great choice for your 2019 Ford F-150 with the Air Lift LoadLifter 5000 Air Springs #AL57385. The #AL57385 are going to help keep your F-150 level, which means the front tires will be in full contact with the ground instead of raised under…

view full answer...

Answer 8

Thanks for the pictures of your gooseneck coupler. Based on seeing them we do know that the Blaylock EZ Lock Gooseneck Coupler Lock #BLTL-50-40D does fit.

view full answer...

Answer 9

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your canopy. Per…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

In regards to HappiJac Truck-Mounted Camper Tie-Downs like part #LC182908-182928, the front tie-down installs inside the bed on the front panel directly behind the cab. The rear tie-down then mounts to the bumper. They will not require removal of the…

view full answer...

Answer 12

Thanks for the pictures but no, the EX2700 tonneau cover that the #EX1700 fits is for a 2004-15 Nissan Titan 6' 7" Bed. The one previously mentioned #EX1770 is for your truck, so it'd for sure work if you have the 2770 tonneau cover.

view full answer...