Best Gooseneck Hitch Ball Available for 2022 Ford F-350 Super Duty

Question

Question:

What is the best gooseneck hitch ball available for my 2022 F-350? I need one because I have to pull my trailer that has a gooseneck hitch. I have the spot for the ball in my truck bed I just don't have a ball yet so it would be great if you could tell me what the best option is.

asked by: Nicole

0

Expert Reply:

The best gooseneck hitch ball for your 2022 Ford F-350 with the OEM prep package is the B&W Ball and Safety Chain Kit # BWGNXA2061. This kit comes with the ball, rubber ball hole cover, safety-chain loops, and a case to store them in.

The reason this ball is the best is because of the handle. The handle provides leverage which makes it easier to remove and also gives you a clean way to carry it. It locks in the horizontal position to prevent accidental unlatching. It uses a built in ball bearing system to hold it in place. This comes with a limited lifetime warranty and is made in the USA.

I have attached an installation video so you can see how the handle works.

expert reply by: Robin H

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

I recommend using the B&W Ball and Safety Chain Kit #BWGNXA2061 for the factory puck system on your 2020 Ford F-350 Super Duty. I like this kit of the Curt #C60692 and Reese #RP30137 options because it uses a handle to secure the gooseneck hitch…

view full answer...

Answer 3

Between the Curt #C60692 and B&W #BWGNXA2061 that will fit your 2022 GMC Sierra 3500 with the factory pucks/prep package, I do prefer the B&W. Though both the Curt and B&W are rated up to 30,000 pounds and will fit your truck perfectly,…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Luis, for your 2018 Ford F-350 that doesn't have the OEM pucks you would want the B and W Turnoverball hitch part #BWGNRK1116 that is a confirmed fit for your truck. I really like the B and W gooseneck hitches as they are known to be the…

view full answer...

Answer 8

Yes, you are able to use the different parts together on your 2022 Ford F-350. First you will start with the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1116. Since you have a short bed truck you may also want the 4" Offset Ball…

view full answer...

Answer 9

To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't see these in your…

view full answer...

Answer 10

Fifth wheel towing is not supposed to be done with the truck's tailgate down. This would cause clearance issues between the trailer and the tailgate which would damage the tailgate pretty quickly around corners. Normally you would lower the…

view full answer...

Answer 11

It is certainly possible for the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY58GR to work on your 2020 Ford F-250 Super Duty short bed, but there are likely going to be clearance issues as these are meant for long bed trucks. That…

view full answer...

Answer 12

Yes, since the Gen-Y Hitch Gooseneck Trailer Hitch for Ford OEM Puck Systems #GY43XR has a 5" offset it will place the pin weight 2-1/2" behind the current center of your gooseneck hitch ball. This does means the front axle will be prone to…

view full answer...

Best Gooseneck Hitch Ball Available for 2022 Ford F-350 Super Duty

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching