B and W Gooseneck Hitch Safety Chain Kit Installation - 2019 Ford F-350 Super Duty Video

The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #GY68GR is roughly 2" shorter than the Lippert 1621 pin box. I've attached a dimensional drawing of #GY68GR for you to check out as well.

Gen-Y's calculation for pin weight is a safe guess, but isn't the most accurate so the only way you'll get the correct capacity Gen-Y 5th Wheel Pin Box is to fully load the trailer and go to a commercial scale to measure the…

I recommend using the B&W Ball and Safety Chain Kit #BWGNXA2061 for the factory puck system on your 2020 Ford F-350 Super Duty. I like this kit of the Curt #C60692 and Reese #RP30137 options because it uses a handle to secure the gooseneck…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…

The Curt Safety Chain Loops #C60691 are the loops which will fit your 2023 Ford F-350 with the OEM puck system. This will allow you to connect your safety chains when using the Gen-Y Hitch Gooseneck Trailer Hitch #GY43XR.

Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY43XR is specially designed to work with the Ford factory puck system. It will push the connection point for the gooseball and your cattle trailer back 5" towards your…

The best gooseneck hitch ball for your 2022 Ford F-350 with the OEM prep package is the B&W Ball and Safety Chain Kit #BWGNXA2061. This kit comes with the ball, rubber ball hole cover, safety-chain loops, and a case to store them in. The reason…

Thank you for the information and photo! I was able to determine that you have a 1621 SHD (super heavy duty) pin box rated for 21K. The Gen-Y equivalent is found as part #GY68GR for a 4.5K tongue weight or part #GY46FR for a 5.5K tongue weight. While…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box part #GY36FR is really not much different than a standard fixed pin box in regards to turning clearance. The actual distance from the center of the coupler to the first set of holes on…

For all intents and purposes there is no difference between the Lippert 1621SHD part #LC1387882 and the Lippert 1621 #LC1387883.

The 5 plugs or pucks you have in the bed of your 2017 Ford F-350 are the OEM hitch rail system and the center plug/puck is for a gooseneck ball. The ball I recommend for you is the B and W pop in ball #BWGNXA2061 because it has a unique handle design…