Trailer Hitches Include Necessary Hardware and Installation Instructions

Question

Question:

I was wondering if the product c26hr came with all the hardware or if I needed to order a hardware package seperate.

asked by: Andrew

0

Expert Reply:

All of our hitches include all of the necessary hardware and instructions for installation. You will not need to purchase the installation hardware separately.

The # C26HR is a class IV hitch made for F-150 trucks that have the factory hitch. Take a look at the attached installation instructions.

expert reply by: Andi

0

Answer 1

For a similar Curt hitch that is designed for the 2015 Ford F-150 models that do have the factory hitch you would want the part #C26HR which is a confirmed fit. It has a towing capacity of 10k total trailer weight and 1,000 lbs tongue weight when not…

view full answer...

Answer 2

As long as your 2021 Ford F-150 with 6-1/2 foot bed does not include the factory hitch, which your picture shows that you do not, you are good to go with the American made Curt Class IV #C26HR. This will bolt directly to you frame and will offer you…

view full answer...

Answer 3

For your 2018 Ford F-150 I recommend the Curt Class IV Trailer Hitch Receiver #C26HR because it has the highest weight capacities among the hitches available for your truck (10,000 towing and 1,000 tongue) and also features a nice hidden design where…

view full answer...

Answer 4

Curt has a hitch that does fit your 2018 Ford F-150 with a factory hitch with the part #C26HR which fits below the factory hitch, but the part #C14017 does not fit versions of your truck that do have the factory hitch.

view full answer...

Answer 5

The Curt Trailer Hitch Receiver #C26HR you referenced requires you to leave your factory trailer hitch receiver installed as it is welded to the frame of your 2017 Ford F-150, and mounts below your factory trailer hitch receiver. The Curt #C26HR…

view full answer...

Answer 6

Just the hitch opening of the Curt hitch part #C26HR will hang below the rear bumper of your 2020 Ford F-150 so while it's visible it doesn't stand out. It looks very standard on the back of your truck as most similar trucks have a hitch with…

view full answer...

Answer 7

view full answer...

Answer 8

The ground wire on a trailer's wiring harness (usually a white wire) should be firmly attached to clean bare metal on the trailer frame. The white ground wire on the vehicle's wiring harness should similarly be attached to clean bare metal on…

view full answer...

Answer 9

A hitch ball does not make a good ground connection for trailer lighting functions. The fact that the lights work for a bit after you hit a bump with the hitched trailer tells us that somewhere in your trailer and vehicle wiring there is an…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Trailer Hitches Include Necessary Hardware and Installation Instructions

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching