Replacement Lug Nuts for a Performance Boat Trailer

Question

Question:

Do you sell lug nuts for a small PERFORMANCE brand boat trailer.

asked by: Donald L

0

Expert Reply:

After looking at some photos of the Performance boat trailers it looks like you likely have 1/2" wheel bolts. If that is the case then the Chrome Trailer Wheel Lug Nut # 12CLN-L would be a good option for you.

I have also linked our selection of boat trailer lug nuts. If you find that you have a lug nut size other than 1/2" you can use that link to find the correct lug nut or you can reach back out to me with your lug nut information and I can help you further.

expert reply by: Scott S

0

Answer 1

There are common lug nut sizes found on trailers: 7/16, 1/2, 9/16, and 5/8 but the most common is 1/2 inch. If you can tell me the trailer weight capacity and wheel size/bolt pattern I can verify if they are likely to be 1/2 inch or another size. If…

view full answer...

Answer 2

We have the Americana Trailer Wheel Lug Nut - 7/8" Diameter - Stainless Steel - 1/2" - 20 #AM90070 which have the same look, threading, and outer diameter. The length of the nut is the only difference. Your current lug nuts are 1-7/8 inches…

view full answer...

Answer 3

The sticker on the Dexstar Steel Mini Mod Trailer Wheel #AM20742 has it rated for 3,520 lbs so it will work great for your application!

view full answer...

Answer 4

The biggest difference between the servo styles that you'll notice is between free backing plates and the others. The free-backing plates will allow your trailer to back up without having the brakes lock up. With surge brakes typically when you…

view full answer...

Answer 5

The wheel on a trailer will typically always be higher than any tire that can be mounted. The limiting factory is the valve stem. A solid metal one, like the Americana Metal, Bolt-In Valve Stem #AM20906, will be rated to to 200 psi, whereas a valve…

view full answer...

Answer 6

The biggest difference between the 6,000 lbs Dexter Trailer Brake Assembly part #23-106 for right hand and part #23-105 for left hand and the 7,000 lbs Dexter Trailer Brake Assembly part #23-181 for right hand and part #23-180 for left hand is the…

view full answer...

Answer 7

Trailer brakes are left- and right-hand specific but not front and back. So for a tandem 6K axle setup you'll use two left-hand and two right-hand 12 x 2-inch free-backing hydraulics brake assemblies. For a high value-for-the-dollar option I like…

view full answer...

Answer 8

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 9

According to Dexstar Wheel, the #AM20741 wheel has a maximum load rating of 3050 lbs at 90 psi. So, 90 psi would be the maximum air pressure. We recommend using #AM20906 for a valve stem. I'll link you to our trailer tire/wheel FAQ article, which…

view full answer...

Answer 10

A 16 inch tire will not fit on a 16.5 inch wheel. You would either need to get new 16 inch wheels with the proper bolt pattern to match what the hubs require or to get your existing wheels you would need to go with 16.5 inch tires. You mentioned you…

view full answer...

Answer 11

The 8.75-16.5 tire size has an overall diameter of 29.5 inches and the tire size 235/80-16 like part #TTWTRTM2358016E has a diameter of 30.8 inches.

view full answer...

Answer 12

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...